Q3210c shot blasting machine

Main technical parameters
>Productivity

>Feeding volume

>Single piece heavy weight

>End plate diameter
>
>Effective volume

>Shot blasting volume

>Dust removal air volume
>Power consumption

>Outline dimensions
/>
**
>Total capacity of the machine

r Features This crawler shot blasting machine is suitable for many varieties
,
>Large and medium-volume production of workpieces Surface rust removal or shot blasting
,
>The workpieces to be cleaned must be castings and heat-treated parts with a unit weight of
> or less that are not afraid of collision
,
>The The machine can be used as a stand-alone machine
,
> or in wiring

>It belongs to the scope of casting machinery. Automatically
>Put the workpiece into the rubber track roller, the operator presses the run button, the shot blasting chamber door is pneumatically closed, shot blasting begins, the crawler runs forward, and the workpiece continuously rolls, efficient and powerful shot blasting machine The shot blasting is projected onto the surface of the tumbling workpiece at high speed, and the workpiece can be cleaned completely and evenly. The steel shots flow into the screw conveyor through the holes on the caterpillar, and then the steel shots are transported to the bucket elevator, and then lifted to the separator by the bucket elevator, where they are separated and stored for later use. After the shot blasting is completed, the door of the shot blasting chamber opens automatically, the crawler belt reverses, and the workpiece is unloaded. Application scope of crawler shot blasting machine
>Cleaning and finishing of die castings, precision castings, precision forgings, etc. Remove surface oxide scale from heat treated castings and forgings. Spring reinforcement. Rust removal and pre-treatment of fasteners.

>Refer to the German shot blasting machine of the late 1990s for localized manufacturing.
>Using high-efficiency direct-coupled powerful shot blasting machine, with high transmission efficiency and large shot blasting volume.
>The separation rate of pellets and sand in the high-efficiency air separation separator is greater than
>.

>The projectiles are evenly covered and there are no dead corners.

>Wear-resistant parts have long service life and can be replaced quickly.
>The equipment operates with low noise.
>Electricity adopts relay (or
>control, control cabinet sound and light alarm device,
> adopts Mitsubishi brand, main original components adopt Siemens joint venture brand, operation is simple and reliable.
rr < br/> >Crawler type shot blasting machine manual
>This machine uses a high-speed rotating impeller to throw projectiles onto the workpieces that are continuously turned over in the crawler track, thereby achieving the purpose of cleaning the workpieces. It is suitable for use in various industries. Sand cleaning, rust removal, scale removal and surface strengthening of small castings, forgings, stampings, gears, springs and other parts. This machine is a new product designed and developed by integrating domestic and foreign technologies. It is a kind of high cleaning efficiency, compact structure, low noise and good completeness. Equipment.
r This crawler shot blasting machine has the following characteristics

r r
>This machine uses a cantilever centrifugal shot blaster, which has long service life and simple structure. Features.

r r
>Uses
B
> type separator, which has good separation effect and high productivity, and has a positive effect on improving the blades.

r r
>With the use of bag dust collector, the dust emission concentration is lower than the national standards, which greatly improves the operator's working environment.

r r< br/> >The use of wear-resistant rubber tracks reduces collision and damage to workpieces and reduces machine noise
/