Year1
- FR：
- 150
- FR：
- 250
- FR：
- 350
Fatrun reinforced concrete demolition equipment
Hydraulic splitting machine Hydraulic splitting machine rock machine cracking machine splitter
General demolition methods:
, manual demolition< br/>, breaker demolition
, cement expansion agent
, static
. :***
.
, pneumatic pick
, hydraulic splitting Machine
Negative environment:
, Narrow space
, Load-bearing requirements
, No large vibrations
, Underwater objective requirements:
, Time requirements
, Social requirements
, Economic requirements
, Manpower requirements
Various demolition methods have objective conclusions, and I will not go into details here. Focus on the new rock concrete demolition equipment hydraulic splitter
The hydraulic splitter needs to be used with an air gun or a hydraulic rock drill. Using the hydraulic principle and the wedge principle, the maximum demolition force of a single gun is
tons , which can complete the rock demolition task in a few seconds. Volume**
,
. Heavy
.
It is easy to operate by humans, works in a static hydraulic environment, and works without vibration. Divided into electric models and diesel models. It is small in size, light in weight and easy to transport. It can still work normally in areas with complex environments and inaccessible to large equipment. For example, during the overhaul of viaducts, it is of course not possible to use a breaking hammer. In some hydropower stations, many existing equipment for dam body processing cannot be stationed for construction.
Complete the rock demolition task within a few seconds. The maximum demolition force of a single gun is
tons, ensuring its work efficiency. The operation is simple and convenient. One or two people can operate a machine well, drilling and Demolition rock concrete. Sustainable use and low maintenance costs. Compared with the use of large equipment, the cost is not at the same level, especially in areas with a small workload.
In terms of safety, there is no comparison with manual dismantling. The rock is broken outward from the inside, and the rock's tensile and compressive resistance are ten times greater. On shale or hard rock, the breaker cannot be used or the construction speed is slow, but the splitter can solve this problem well. Of course, for places where cannon can be fired, the use value of the splitter is only significant in terms of its safety. Compared with the hydraulic splitting machine, the breaking principle is different. The breaking hammer knocks the rock from the outside. The working principle of the splitting machine is: using the wind draft (hydraulic draft) to drill the round hole. , insert the wedge block assembly of the splitting machine. When the hydraulic pump station is started, the hydraulic pump station works to generate high pressure, which drives the middle wedge of the splitting machine wedge block group to move forward and spreads the two sides of the reverse wedge, causing a huge split. Force (up to
tons)! This splitting force goes from the inside of the rock outward, destroying the internal structure of the rock. (This force is tensile stress. It should be noted that the tensile stress of rock is far less than the compressive stress, and is only about the compressive stress.
The rock is here Under the action of the splitting force, it splits along the set position according to people's needs.
, safety
The splitting machine can work in a controllable manner in a static hydraulic environment, and will not be like
. :***
The splitting machine and other impact demolition and rock drilling machines Equipment like this does not require complex safety measures to produce some hidden dangers.
Environmental protection
When this plication cracking machine is working, it will not produce vibration, impact, noise, dust, flying debris, etc. The surrounding environment will not be affected, allowing you to work without interference even in densely populated areas or indoors, as well as next to precision equipment.
Economy
This plication splitting machine can complete the splitting process in a few seconds, and can work continuously without interruption. It has high efficiency, low operation and maintenance costs, and no need for elephants
. :** *
Isolation or other time-consuming and expensive safety measures should be taken as required.
, Accuracy
, Applicability
The humanized appearance design and durable structural design of this plication splitting machine ensure that its use is simple and easy to learn, requiring only one person to operate, easy maintenance, and long service life. It is very convenient to transport the hydraulic pump station.
Contact hotline:
Miss Hu
Mr. Xu
Dongguan City, Guangdong Province Farun Machinery Co., Ltd.
WhatsApp
