ND-4.2×4 type internal combustion flexible shaft tamping machine is suitable for high-speed railways.

::. < /> < 3: Scope of application of . type internal combustion flexible shaft tamping machine
-Jinzhou Shuangxing has twenty years of professional manufacturing
Contact person: Manager Bao
Address: Jinzhou, Liaoning Province Songpo Road, Linghe District, City
Fax:
Online:
Sales hotline:
- Striving to create the industry's leading brand Jinzhou Shuangxing
internal combustion flexible shaft tamping machine
Since the founding of the People's Republic of China, during the many years of development of my country's railways, the maintenance and repair work of railway works has mainly gone through three stages: First, post-event repairs in the early days of liberation; second, annual maintenance since the mid-2000s. Periodic comprehensive maintenance III is a comprehensive maintenance that is implemented once a year or every few years according to different tracks and total weights since the mid-2000s. However, as the running speed of trains continues to increase, higher requirements are put forward for transportation safety and comfort. It is no longer possible to use the running interval for maintenance operations. It is an inevitable trend for various road maintenance machines to replace manual maintenance. Therefore, road maintenance machinery The introduction and development of railway maintenance equipment are the focus of today's railway maintenance operations.
Type internal combustion flexible shaft tamping machine
Model: air-cooled four-stroke (type)
Cylinder displacement:
Maximum output power: horsepower
Maximum torque:
Weight:
Vibration frequency:
Amplitude:
Maximum excitation force:
Production efficiency: - root/group hour
Vibrator diameter:
Flexible shaft diameter:
Hose diameter:
Total weight:
Internal combustion flexible shaft tamping machine
Use and maintenance
Please read the Honda internal combustion gasoline engine manual in detail.
For Honda internal combustion gasoline engines, add appropriate amounts of engine oil and gasoline according to the instructions.
Before starting the gasoline engine, check whether the main shaft of the vibrating body and the vibrating body are well connected. If the vibrating body is separated from the main body, insert the head of the vibrating body on the main shaft of the vibrating body, lift the positioning pin, align it with the main shaft and insert it. Put down the positioning pin, rotate the vibrating body jacket, and insert the positioning pin into the vibrating body jacket. Then remove the vibrating body from the chassis, place it in a safe place, and start the gasoline engine according to the gasoline engine manual.
Increase the throttle, check whether the vibrating body vibrates, and start tamping under normal circumstances.
Before stopping, first reduce the throttle, then turn off the switch, and place the vibrating body on the respective sockets of the chassis.
Check whether all parts are loose and whether the screws are tightened.
During storage, be sure to close the fuel valve to prevent gasoline from leaking and causing danger.
During transportation, gasoline and engine oil must be drained to prevent danger.
Please pay attention to moisture and humidity during storage.
Type internal combustion flexible shaft tamping machine
Maintenance and inspection
Maintenance
Carry out after daily shift work, the specific contents are as follows:
) Wipe away dust and oil.
) Tighten all fasteners.
) Carry out maintenance on the gasoline engine according to the gasoline engine manual.
, Maintenance
After 3 hours of use, the tamping machine needs to be fully inspected. The specific content is:
) Disassemble the main shaft of the vibrating body and check whether the bearing is intact
) Open the belt cover and check whether the belt is intact.
) Check whether the belt tension is normal.
, The service life of the flexible shaft vibrator
Under the correct use method, the length of the tamping line of the flexible shaft vibrator is less than.
Type internal combustion flexible shaft tamping machine
Current tamping machinery mainly includes hand-held internal combustion tamping picks, hydraulic tamping machines, high-frequency vibration flexible shaft tamping machines, and the heavy-duty tamping machine recently proposed by the Ministry of Railways. Under high-speed conditions, the rails of major trunk lines have been generally replaced, thus changing the quality of railway transportation. Internal combustion tamping picks adapt to the trend of railway construction. Technology is constantly innovating