Gear box oil and gas separator filter element oil filter matching filter element model vacuum pump filter element real shot

过滤精度：

0.1-100

过滤面积：

1-100

发货方式：

物流

Gearbox oil and gas separator filter element Oil filter matching filter element model Vacuum pump filter element real shot refers to an integrated component that can be installed and disassembled as a whole on the filtration equipment and can function as a filter medium. The filter element is an important part of the filter element filter. The structure is generally columnar, with simple form, easy to use, high filtration precision and low installation cost. It is widely used for separation in the fields of automobiles, aerospace, catering, brewing, electroplating, chemical industry and environmental protection. At work. The mass concentration of solid particles does not exceed . and the particle size is smaller than the feed liquid, which is very suitable for filter element filtration. The material of the core is generally organic membrane, porous ceramics, sintered metal, fiber felt, filter paper, microporous resin tube, etc. With the advancement of membrane making technology, filter elements currently made of organic membranes can intercept large amounts of solid particles and colloidal particles. Other types of filter elements can also retain colloidal particles down to a few microns. Gearbox oil and gas separator filter element Oil filter matching filter element model Vacuum pump filter element Actual photo The main structure of the filter element is columnar. In order to increase the filtration area, its surface can be processed into pleated, hinged or plate type. From the perspective of filtration mechanism, Filter elements can be divided into three types: surface filtration type, depth filtration type and streamline filtration type. There is only one way for surface filter elements to capture solid particles, which is direct interception. This type of filter element has the ability of deep filtration, but its dirt holding capacity is low and the filtering area is limited. According to the structural characteristics, the filter element is divided into homogeneous type, non-homogeneous type, adhesive type, wound (rolled) type and streamline filter type.
Gearbox oil and gas separator filter element oil filter matching filter element model vacuum pump filter element actual photo The purpose of the filter is mainly to use filter media to separate the container into an upper chamber vacuum filter and a lower chamber to form a simple filter. When the suspension is added to the upper chamber, it passes through the filter medium and enters the lower chamber under the action of pressure to become filtrate. The solid particles are trapped on the surface of the filter medium to form a filter cake. When the filter equipment is filtering, the filter residue layer accumulated on the surface of the filter medium will gradually thicken, and the resistance of the liquid to pass through the filter residue layer will increase accordingly, and the filtration speed will gradually decrease. The equipment will stop filtering when the filter chamber is full of filter residue or the filtering speed is too slow. Generally, when operators clean the filter, they do not completely remove the impurities in the filter cartridge, resulting in a small amount of impurities remaining in the equipment. If the vacuum belt dehydrator is started at this time, it will be easy to remove the filter cartridge. The remaining impurities flow into the liquid tank. In order to prevent human negligence, general filter equipment will be specially designed with a circulation loop to provide convenient operation.
So how to solve the two major defects of the vacuum filter equipment itself? In order to solve the problem of unsealed structure, the filter equipment must be improved, such as using a fully sealed outer frame design: when it is easy to evaporate, When filtering organic solvents and toxic, flammable, and explosive materials, the vacuum belt filter needs to adopt a fully enclosed design. As for the main reason for the high power consumption of the vacuum pump in the filter, it is the drying section of the filter cake. Since the moisture content of the filter cake is mainly related to the amount of gas passing through the filter cake, in order to save the energy consumption caused by drying the filter cake, On the premise of not reducing the moisture content of the filter cake, additional air extraction equipment with low vacuum degree and large air extraction capacity is installed in the drying area to save energy consumption.