Anti-spill skirt

裙宽：

160mm

厚度：

16mm

价格：

113

Nowadays, enterprises must consider environmental protection and dust reduction. Of course, spray can effectively reduce dust, but it is only limited to the belt head. Dust reduction during belt transportation is also very important. The use and installation of anti-overflow skirts can effectively solve the problem of overflowing coal dust. The product has a double-layer sealing structure that is convenient and quick to adjust. The inner layer prevents materials from overflowing, and the outer layer plays a role in dust reduction.
Anti-spill skirt
The anti-spill skirt can effectively reduce dust and dryness. It plays a sealing role between the conveyor belt and the guide trough and between the buffer bed and the guide trough. The anti-overflow skirt is used together with the holder. The one-meter anti-overflow skirt includes two holders and one meter of aluminum.
Regarding the use of anti-overflow skirts:
The polyurethane anti-overflow skirts adopt double-layer sealing. After many years of on-site working condition investigation, the rubber is continuously adjusted according to the customer's sealing performance and installation requirements for the anti-overflow skirts. , mature and stable products began to be used in mines and ports on a large scale.
The anti-overflow skirt is used for sealing between the conveyor belt and the guide trough and between the buffer bed and the guide trough. The main installation methods are: butterfly nut type and handle type, which are directly installed on the belt. The lower edge of the machine guide trough.
Introduction to the purpose of the holder:
The anti-overflow skirt is mainly used for sealing between the conveyor belt and the guide trough and between the buffer bed and the guide trough, and is used to compress the anti-overflow skirt The combination of the plate and the belt also shows that the anti-overflow skirt is a necessity for the belt machine and is a consumable item. Quality requirements need to be very high!
Simple installation method:
Directly installed on the lower edge of the belt conveyor guide trough.
Anti-overflow skirt
Features
Easy and quick to install and adjust.
Double-layer sealing, the inner layer prevents materials from spilling out, and the outer layer acts as a dust suppressor.
. There is a composite polyurethane wear-resistant layer in the area in contact with the belt, which has a long service life and does not damage the belt. Quickly fix the skirt panel through angle aluminum, clamps, etc.:
Install the clamp:
Angle aluminum is pressed and formed at one time, material: all aluminum, beautiful appearance, no rust, it is round The column is locked in the holder and will not fall off. . The base of the clamper is welded to the outside of the side of the guide trough, and the slideway goes deep into the base, allowing the clamper to move appropriately left and right along the base. Manually rotate the compression handle and push it upward (downward) to the end when appropriate. This can apply sufficient pressure to the corner aluminum to maintain the position of the skirt board, and the compression handle will not loosen and fall off. , The holder is made of hot-dip galvanizing, which is light in weight, has good anti-corrosion performance, and does not rust. The fastening bolts are made of stainless steel 3, which will never rust. It is suitable for use in dark, humid, and even short-term water flushing environments. , Except for the first installation, the holder base needs to be welded, the rest of the process and subsequent replacement of the skirt plate do not require the use of any tools, installation and disassembly are extremely convenient and fast.