Year1
- 抗压强度：
- 65
- 抗折强度：
- 30
- 配比：
- 3:1
Shijiazhuang Steel Adhesive Manufacturer Company Phone Number
Technical Guidance Hotline
Modified Epoxy Steel Adhesive
Product Features
This product has high strength, especially for steel- The steel bond shear strength and the steel-concrete bond shear strength are high, and have good toughness and impact resistance.
, good aging resistance, acid and alkali resistance, shrinkage rate can be reduced to below, and the bonded parts have good dimensional stability.
Scope of application
Used for pasting various prefabricated components such as beams and columns.
, applied to the reinforcement construction of cracks in various components.
Used in reinforcement construction of bonded steel plates and beam surfaces to improve load capacity.
, used in the bonding construction of brackets, stairs, sidewalk curbs and other related building components, building materials, and decoration materials. After curing, the applicable maximum temperature of the glue is ℃ and the minimum temperature is -℃.
Execution standards
Performance indicators
Construction process
Surface treatment of concrete and steel platesrr Selection and preparation of fixed componentsrr Structural glue batching and glue mixingrrr Applying structural glue and pastingrr Fixing, Pressurization and curingrr removal of fixed pressurized componentsrr quality inspection and anti-corrosion.
Construction Instructions
Component A: Milky white viscous paste, Component B: Gray black viscous paste, density after mixing: 3kg/3.
, Surface treatment
Treat the concrete surface to make the bonding surface dry, oil-free, dirt-free, and dust-free.
Polish the concrete bonding surface, remove the surface layer, remove dust, and wipe it clean.
Carry out rust removal treatment on the surface of the bonded steel plates.
, Glue preparation
The filler in the glue is easy to precipitate, but it does not affect the strength. Stir evenly before use. (Do not use the same stirring rod when stirring components A and B.)
The glue is a dual component of A and B. Before mixing the glue, the glue of components A and B should be stirred evenly respectively, and then press the component A:Group B Weigh the portion proportions and pour into the prepared clean container, stir thoroughly until the color is uniform.
The amount of glue mixed each time should not be too much, generally no more than 100%.
Paste, fix and solidify
Apply the evenly mixed glue to the treated concrete and steel plate bonding surfaces respectively, thick in the middle and thin at the edges, and then bond the steel plate at the predetermined position.
After the steel plate is bonded, it should be supported immediately with clamps, bolts and other tools to hold it in place, and appropriately pressurized so that the glue is just squeezed out from the edge of the steel plate.
The operating time of this glue after mixing the two components A and B at room temperature is 3-.
The glue can be cured when the temperature is ℃. Remove the pressurized fixing device and it can be used under force after three days. When the temperature is lower than ℃, the curing time should be extended accordingly.
The operating temperature is above ℃. If it is lower than ℃, temperature raising measures should be taken.
Packaging, storage and transportation
This product is packed in iron drums, with packaging specifications of /group.
This product should be stored sealed in a dry and clean warehouse with an ambient temperature of ℃-℃.
This product can be stored at room temperature for one year without significant changes in performance. If it exceeds one year, it can still be used after passing the test.
This product is a non-dangerous product and can be transported by civil aviation, railway, sea transportation and highway.
Component B is prone to discoloration during long-term storage, which is normal and does not affect the basic performance and use of the product.
This site searches for epoxy cement, steel glue, pouring steel glue, potting glue, carbon glue, building structure glue, epoxy grouting material, grouting material, equipment foundation grouting material, secondary grouting material, High-strength cement grouting material< r>
Modified epoxy infusion steel adhesive
Product Features
This product is in liquid form and is easy to repair small cracks in concrete. After buildings and structures are damaged, their integrity can be effectively restored after being reinforced with glue. The appearance will not be damaged, and it has good toughness and impact resistance.
This product has high bonding strength after curing, basically no shrinkage during curing, and has good resistance to water, oil, alkali and dilute acid media.
Scope of application
It is used in pouring and repairing cracks in reinforced concrete, and in pouring and repairing cracks in concrete walls, floors and basements.
, widely used in outsourcing steel-bonded steel reinforcement projects.
Execution Standards
Performance Index
Construction Instructions
The surface of the steel plate and the concrete pasting surface should be surface treated. The surface of the steel plate should be derusted, polished and wiped clean. The surface of the concrete should be polished. , blow dryer to remove dust and wipe clean.
When the glue is at room temperature (℃), the ratio of A to B is: when used, the operable time is (3-). If the temperature is higher than this, the operable time becomes shorter. Before mixing the glue, mix the two components of glue A and B in their respective buckets for a few minutes. Then weigh it according to the ratio of component A: component B: and pour it into the container, stir until the color is uniform (usually 3-). In winter or when the temperature is low, components A and B can also be operated in the ratio of , if the ratio of A to B is used, the operating time will become shorter. (Note: When stirring two-component glue A and B, the same stirring rod cannot be used at the same time.)
It is advisable that the amount of glue mixed each time should not exceed.
Carry out pouring construction according to the requirements of the design drawing, and seal the walls with cement at various parts that are prone to adhesive loss to prevent glue loss.
When choosing pressure injection, the pressure of the general pressure pump should be .~.3. The maximum should not exceed...
The minimum operating temperature of this glue is ℃. If it is lower than this temperature, necessary temperature-raising measures should be taken.
During the construction process, if it accidentally splashes on the skin or eyes, rinse it immediately with plenty of water. In serious cases, seek medical treatment in time.
Packaging, storage and transportation
This product is packed in iron drums:/group.
This product is not a flammable and dangerous product and can be transported by air, sea, railway, and road.
This product should be handled with care during storage, transportation, loading and unloading, and should be protected from rain, explosion and sun, and must not be turned upside down.
. This product can be stored at room temperature for one year without significant changes in performance. If it exceeds one year and passes the test, it can still be used.
Component B is prone to discoloration during long-term storage, which is normal and does not affect the basic performance and use of the product.
This site searches for epoxy cement, steel glue, pouring steel glue, potting glue, carbon glue, building structure glue, epoxy grouting material, grouting material, equipment foundation grouting material, secondary grouting material, High-strength cement grouting material< r>
Ruishengte Company Profile 3-Manager Cui
Beijing Ruishengte Building Materials Co., Ltd. (referred to as Ruishengte Building Materials) is a company with management, R&D and sales as the link. A Chinese building materials supply enterprise whose main business is the research and development and sales of new materials such as grouting reinforcement, repair, waterproofing and anti-corrosion, building structural adhesives, decoration auxiliary materials, concrete admixtures, etc. Its main products include high-strength non-shrink grouting materials, acid and alkali resistance and anti-corrosion Clay, epoxy mortar, epoxy asphalt clay, polyacrylate emulsion, silicone hydrophobic agent, elastic waterproof emulsion, sand treatment agent, concrete interface agent, concrete expansion agent, concrete crushing agent, steel bar rust inhibitor, alkali-free Accelerated setting agent, waterproof curing permanent set liquid, repair mortar, reinforcement mortar, waterproof mortar, high-strength wear-resistant material, construction rubber powder, secondary grouting material, reinforced grouting material, equipment installation grouting material, marble adhesive (yi cement) ), concrete repair, chimney anti-corrosion, sewage pool anti-corrosion, petrochemical anti-corrosion cement materials and hundreds of other products. Beijing Ruishengte adheres to the principle of integrity, pursues quality and develops the industry, advocates the management policy of quality every sale and a people-oriented corporate culture, and adheres to the development concepts of quality first, pioneering innovation, sustainable development, and win-win cooperation. Welcome new and old customers to call us to discuss cooperation and build brilliant modern architecture together!
Use of Ruishengte Building Materials 3 Manager Cui
Reinforcement materials, waterproofing, plugging, tiling, construction, anchoring, planting bars, steel bonding, mortar, design, supervision, structural reinforcement, crack treatment, Pavement repair, hospitals, buildings, office buildings, construction projects, terminals, hotels, guesthouses, power plants, chemical plants, foundation grouting, new steel materials, special building materials, track foundations, structural reinforcement, acid-base tanks, villas, ceramic tiles , post-disaster reconstruction, epoxy resin, bridge piers, refinery, maintenance, infrastructure, subway, urban rail, compressor, equipment installation, chlor-alkali chemical plant, stamping machine, structural column angle, bank, Olympic Games, flooring, steel plant, swimming Museum, gymnasium, Water Cube, cinema, shipyard, railway tracks, Bird's Nest, municipal pipelines, sewage wells, tunnels, carbon fiber, earthquake-resistant Longqi Square, Hohhot Development Zone Phase II, Jiangsu Solar Power Plant, Shuangyashan Power Plant, Jiuxianqiao Shopping Mall, acid-resistant Brick pasting, concrete structure repair, wall and floor leveling, house roof repair, impermeability and wear resistance, factory floor repair, wear resistance and pressure resistance, steel factory, power plant, highway, bridge, pier, tunnel, railway, airport runway, railway machine room repair Reinforcement, roofs, walls, workshop floors, refineries, sewage wells, municipal pipelines, swimming pools, hospitals, chlor-alkali chemical plants, earthquake resistance, high temperature resistance, reinforcement repair and pasting epoxy mortar
Ruishengte manufacturer supply area 3 Manager Cui
WhatsApp
