Milky white PVDF board

>English name
>
>Chinese name: polyvinylidene fluoride.
>Plate
>Rod is made of
>resin extruded at high temperature to form a plate. It is a fairly pure polymer. It does not contain UV stabilizer, heat stabilizer, softener, lubricant or Flame retardants and other additives.
>Plate
>Rods can be welded
>with welding rods to form tanks and equipment. Used to hold various chemical liquids. Particularly suitable for the transfer of pure chemical reagents in pure water systems and the semiconductor industry. Due to
>'s chemical inertness, it hardly reacts with any media.
<<
Plate
Characteristics of rods
>Plate
>Rods are better than similar ones PTFE has higher stiffness and pressure-bearing capacity, but is less slippery and less electrically insulating. It has high strength and toughness under low temperature conditions and can self-extinguish. Its operating temperature is between
> and
>
>.
>Stable to chloride, bromide and energy rays. Both ester and ketone solutions can corrode it at high temperatures
>Plate
>Rods are resistant to high temperatures, have excellent resistance to chemical corrosion and hydrolysis, and have outstanding UV resistance and weather resistance. High mechanical strength, good rigidity, good creep resistance, good sliding properties and wear resistance, inherent low flammability, and good electrical insulation properties.
<<
Plate
Application fields of rods
>Plate
>Rods are in semiconductors, Electronic industry fields such as liquid crystal related devices, chemical equipment fields
>,
> Various parts of food processing machines and packaging machines, pipe seals, pump parts, rotating disc valves, slide rails, etc. Suitable for petrochemical, chemical, metallurgy, food, paper, textile
> Pipes, seals, pump components, rotating discs, valves, stop valves, extraction centrifuges, cogs, pipe connections, slide rails. Manufacturing of components for the pharmaceutical and atomic energy industries.
Batch Performance Parameter Table
>Properties
>Test Standards
>Data
>Property Test Standards
>Data
>Density
/> >Volume resistance
>
>Water absorption
>Surface resistance
>
>Chemical resistance
>Dielectric constant
> Continuous use temperature
>~
>Dielectric loss factor
>Yield tensile strength
>Dielectric strength
>Yield tensile strain
>Leakage current Strength
>Ultimate tensile strength
>Adhesion
>Ultimate tensile strain
>Non-toxic and harmless
>Impact toughness
> Friction coefficient
>Notched impact toughness
>Combustion properties
>Rockwell ball press hardness
>UV resistance
>Shore
>Hardness
>Acid resistance
>Bending strength
>Alkali resistance
>Elastic modulus
>Carbonated water resistance
>Vicat softening temperature
/> >
>Chlorine carbonate water resistance
>Thermal distortion temperature
>
>Aromatic compound resistance
>Thermal linear expansion coefficient
>*
>Ketone resistance
>Thermal conductivity
>Hot water resistance
>The above data are for reference only and cannot be used as a guarantee for material selection.
>Flammability, good electrical insulation properties
<<
Plate
Specifications and dimensions of rods
>Plate thickness
>Width
>Length
>
>Rod diameter
>Length