Beijing new building formwork support and reinforcement customized and supplied according to drawings

强度：

235

售后：

现场指导

颜色：

原色

Beijing's new building formwork support reinforcement is customized and supplied according to drawings. The digital steel structure formwork support combination has won a national patent. This digital steel structure formwork support combination is simple to operate, flexible and convenient to install, disassemble and height adjust. It has a wide range of applications and saves time, labor and materials. The labor cost of using traditional support is about RMB 1 per square meter, while the digital steel support can be completed with only RMB 1 labor cost. In addition, a large amount of wood, iron wire and nails were saved.
, The materials used in the digital steel structure formwork support combination r are high-performance cold-rolled steel, with thicknesses of
mm to
mm. The advantages of this new material are: corrosion resistance, high elasticity, firmness and no deformation.
, each support rod can support about
tons, the two main dragon spines can bear a weight of
tons, and each secondary dragon spine can bear a weight of
tons. Nowadays, the thickness of poured concrete on construction sites is generally
centimeters, and the weight of the same area is up to
kilograms, so this support strength is fully sufficient for high-rise buildings. The length of the main dragon ridge can be adjusted arbitrarily between meters and meters. The short main dragon ridge is used for balconies, bathrooms and cubicles. The length of the auxiliary dragon spine is available in
meter,
meter and
meter specifications, the support rod is
meter long, and the overall support height is optional from
meter to 3
meter Adjustment, such as the height of the hall can be adjusted arbitrarily with the connecting rod, and the adjustable height of the base is
meters. The lock nut plays the role of fixing the support rod, and the olecranon card is used to connect the support rod and the tie bar to make the whole stronger.
, adjust the height of the base to
cm, the short section specifications are
meters and
meters long, can be connected to unlimited heights without affecting the firmness, trapezoidal pull The strips are easier to fasten, increasing the structural strength. The connection between the main ridge and the support pole relies on a semi-rotating lock, which is easy to operate and difficult to trip. The same principle applies to the connection between the beam bottom and the support pole. Using traditional steel formwork, we also invented special clips. Taking a 30-square-meter combined structure as an example, the on-site operation only takes
minutes to complete.
, products can be customized according to customer specifications and standards