Does Jinzhong sell 013.30.710.001 slewing bearing?

' (3,3,3) -
Is there any 3.3.. slewing bearing for sale in Jinzhong? Features of thrust spherical roller bearing:
/ ' (3,3,3) - .The The load action line of the bearing forms a certain angle with the bearing axis, and has a large axial load capacity. It can not only bear axial load but also bear a certain radial load.
/ ' (3,3,3) -. The spherical rollers of this type of bearing are arranged in an inclined manner, and the raceway surface of the seat ring is spherical. It has self-aligning performance, so it can allow some tilt of the shaft. It can be used in extremely heavy load situations, and the allowable speed is relatively high. Oil lubrication is generally used
/ ' (3,3,3) -. The load is relatively large, suitable for low speeds, and can be aligned (bearings The inner sleeve and outer sleeve can still work even if they are tilted) The bearing has two kinds of retainers, copper and steel, and has a taper in the inner ring
/ ' (3,3,3) - Installation precautions:
/ ' (3,3,3) -. If the interval between opening the package and assembly is short, clean wrapping paper should be used to cover the bearings. If the interval between opening the package and assembly is long, clean wrapping paper should be used. Wrap the bearing again in wrapping paper. The dust-proof agent on the bearing can usually coexist with most lubricants, so new bearings do not need to be cleaned before assembly. If there is excess dust-proof agent on the bearing surface, please use a clean cloth to remove it from the outer diameter and inner diameter of the bearing. As well as rub off on the edges.
/ ' (3,3,3) - .If it is a special lubricant bearing used in high-speed and precision parts such as machine tool spindles, it may need to be cleaned during the trial period.
/ ' (3,3,3) - .If bearings with different production batch numbers are used together, or the bearings are assembled in opposite directions, the clearance or preload may be incorrect. If the clearance is too small, the temperature will rise during operation, causing bearing burns. On the contrary, if the clearance is too large, it may cause vibration and reduce operating accuracy.