Linyi skf bearing, Linyi 133.40.4500.402 slewing bearing

Linyi Bearing, Linyi...Slewing Bearing - ! / , -Normally, in order to judge whether the disassembled bearing is normal and can be used, the bearing should be inspected after cleaning. Check the condition of the raceway surface, rolling surface, and mating surface, the wear of the cage, the increase in bearing clearance, and any damage related to the decrease in dimensional accuracy, and abnormalities. For non-separable small ball bearings, use one hand to support the inner ring horizontally and rotate the outer ring to confirm whether it is smooth. For separable bearings such as tapered roller bearings, the rolling elements and raceway surfaces of the outer ring can be inspected separately. Since large bearings cannot be rotated by hand, pay attention to the appearance of rolling elements, raceway surfaces, cages, rib surfaces, etc. The more important the bearing, the more careful inspection is required.
< / , -: - ! / , -Secondly, you need to use a rag to dry the cleaned bearing, and then soak it in anti-rust oil. During this process, the bearing should be completely in contact with the anti-rust oil and the bearing should be rotated continuously so that the oil film formed by the anti-rust oil can cover the surface of the bearing, thus achieving the purpose of anti-rust.
< / , -: - ! / , -Then you need to apply butter evenly on the surface of the bearing, including the inner and outer rings, wheels, and cages. And the bearing is rotated while wiping, so that the butter can actually enter the inside of the bearing to fully lubricate it.
< / , -: - ! / , - When using bearings, please pay attention to the following matters:
< / , -: - ! / , - Keep the bearing and its surrounding environment clean
< / , -: - ! / , - Even if invisible dust enters the bearing, it will increase the wear, vibration and noise of the bearing.
< / , -: - ! / , - Be careful when using and installing
< / , -: - ! / , - Strong stamping is not allowed, and direct hitting of the bearing with a hammer is not allowed. Allows pressure to be transmitted through the rolling elements.
< / , -: - ! / , -:, Use appropriate and accurate installation tools
< / , -: - ! / , - Try to use special tools and avoid using cloth and short fibers Something like that.
< / , -: - ! / , -, Prevent the rust of the bearing
< / , -: - ! / , - When taking the bearing directly with your hands, you must fully wash off the sweat on your hands. And apply high-quality mineral oil before operation. Pay special attention to rust prevention during the rainy season and summer.