Heze slewing bearing 023.25.560.002 dealer

Heze slewing bearing 3... Dealer - ! / , -Tapered roller bearings mainly bear radial and axial combined loads, mainly in the radial direction. The load-bearing capacity of the bearing depends on the raceway angle of the outer ring. The larger the angle, the greater the load-bearing capacity. This type of bearing is a separable bearing and is divided into single-row, double-row and four-row tapered roller bearings according to the number of rows of rolling elements in the bearing. The clearance of single-row tapered roller bearings needs to be adjusted by the user during installation. The clearance of double-row and four-row tapered roller bearings has been set according to user requirements when the product leaves the factory and does not require user adjustment.
< / , -: - ! / , -Tapered roller bearings have conical inner and outer ring raceways, with tapered rollers arranged between them. The projection lines of all conical surfaces converge at the same point on the bearing axis. This design makes tapered roller bearings particularly suitable for carrying combined (radial and axial) loads. The axial load capacity of the bearing is mostly determined by the contact angle. The larger the angle, the higher the axial load capacity. The angle is represented by a calculation coefficient. The larger the value, the greater the contact angle, and the greater the suitability of the bearing for bearing axial loads.
< / , -: - ! / , -Tapered roller bearings are usually separate types, that is, the tapered inner ring assembly consisting of an inner ring with a roller and cage assembly can be connected with the tapered outer ring (outer ring ) installed separately.
< / , -: - ! / , -Tapered roller bearings are widely used in automobiles, rolling mills, mining, metallurgy, plastic machinery and other industries.
< / , -: - ! / , -The main reason for the occurrence of scars on tapered roller bearings during installation is: the inner ring and outer ring of the bearing are skewed during installation and assembly, or the inner ring and outer ring are skewed during installation and assembly. The impact load occurs during the process, eventually causing scars on the bearing.