Supply fiberglass cable brackets with strong corrosion resistance and weather resistance and long service life. Welcome to order.

-, Zhongxiang Zhongxing Composite Materials, Zaoqiang County
-, Contact number:
-, Fax:
-, Mobile phone:
3., Product performance
3< br/>, High strength and good designability
3., FRP fiber composite materials are mainly composed of glass fiber for reinforcement and thermosetting resin for bonding. The tensile strength of glass fiber is very high
, and its content, length, and laying form determine the strength of the stent product.
3
, The strength of thermosetting glass fiber reinforced composite materials can be in the
, range. Therefore, we can design the amount, length and laying form of glass fiber according to the stress condition, output, production process and price affordability of the product.
3
No creep: The rigidity of the fiberglass fiber composite bracket is twice that of the fiber reinforced bracket produced by a company in the United States. It will not deform even under long-term load, and will not tilt downward
3
, Fire prevention: The oxygen index is an important detection method for evaluating cable fire products. Oxygen index refers to the burning resistance of fireproof products under maximum oxygen conditions
,
. The use in engineering should be determined according to the burning intensity. For example
,
, under the conditions of
, cable, if a cable ignition accident occurs, a high temperature heat of
, degrees or above can be formed within
,- accumulation, causing the cable to ignite in the axial direction. The more cables there are in densely packed areas, the greater the combustible mass. The oxygen index of the cable bracket products produced by our company can reach up to
,-.
3
, Corrosion resistance
3., Fiberglass fiber composite bracket is corrosion-resistant and is especially suitable for use in humid, salt spray, acid and weak alkali environments.
3
, Electrical insulation: The insulation performance can be adjusted according to the usage requirements.
3
,- ) Electrical insulation type, insulation resistance is greater than
,
3
,-) Antistatic type, surface resistance is less than
,.
3
, easy to use
3., can be installed with pre-embedded screws or expansion screws. Greatly reduces the labor intensity of employees.
3
, Service life: underground
, years, above ground
, - years
3
, Instructions for use
3
, if the cable trench has been completed, or the cable trench bracket is replaced, a screw-fixed cable trench bracket can be used. This cable bracket is selected according to actual needs, and you can choose heavy or light. You can choose stainless steel expansion screws with a diameter of ￠
,-
3
. If the cable trench has not been completed, you can choose a pre-embedded cable trench bracket. The fixed end of this cable trench bracket It is directly buried in the walls on both sides of the cable trench, and the remaining part is used to support the cable. This cable trench bracket has excellent stress and better load-bearing than the first type, and it is not fixed by any metal, avoiding rust and acid and alkali corrosion. wait. The depth of pre-embedding is optional
, - or above is enough.
3
, The fixed wall surface must be flat to ensure the stress-bearing area of the base and avoid distortion. When laying cables, it should be laid from top to bottom, and when dragging the cables, it should be dragged horizontally.