FRP grating car wash room 4S shop FRP grating plate grating cover drain ditch trench grating plate

Zaoqiang County Zhongxiang Zhongxing Composite Materials
- Contact number:
- Fax:
- Mobile phone:
FRP grating thickness:
Thick: suitable for general use The width and inner diameter of the drainage ditch should not exceed 3, and it can bear the weight of a vehicle with a load of about 3 tons.
Thickness 3: Suitable for use in drainage ditches and car wash stations. The distance between the supports below is preferably no more than 3.5 meters, and it can bear a load of about 3.5 meters.
Thickness 3: Suitable for drainage ditches and car wash stations. The supporting spacing (horizontally and vertically) below is preferably no more than 1,000 tons. It can carry a car of about 10,000 tons.
Scope of use of FRP gratings
Water treatment: maintenance walkways, gutter covers, large containers, cleaners, waste racks, flow troughs, biochemical water treatment tank hangers, ventilation windows, stairs
/>, Queta operating table paving chemical plant: stair treads, operating platform, guardrail, double-layer floor, cover plate, grating
, petroleum industry: offshore oil platform textile factory: replacing metal grating, wooden The platform covers the cement floor, next to the bleaching and dyeing vats, on the floor, near the valve, etc., transportation industry: platforms, ship decks, walkways, military minesweepers, stair treads
, stair treads, replacing expensive stainless steel, loaded ground Ping pulp and processing plants
, stair treads and floor slabs, floor walkways, places with high humidity
, electronics industry: cover plates, pickling workshops, anti-static grilles and high-cleanliness workshops
/>, corrosion-prone floors, stairs, smooth floor workbenches and stair treads, others: corrosion-resistant shelves, decorations, square fountains, scaffolding, civil construction facilities, breeding industry fences and double-layer floors, etc.
Characteristics of FRP grating
1. Light weight: Its specific gravity is around 0.01 cubic decimeter, and its weight is only 1/2 of steel and 1/2 of aluminum. 2. High strength: Its strength is ten times that of rigid polyvinyl chloride. Its absolute strength greatly exceeds that of aluminum and is three times that of ordinary steel.
Corrosion resistance: It is stainless, mildew-proof, corrosion-resistant, does not require paint, and can withstand many Corrosion of gas and liquid media
4. Fatigue resistance: The fiberglass grating has some elasticity, which makes people who work on it feel comfortable for a long time. As a working platform, it reduces the tension in the legs and back of the staff. , which increases work comfort and thus improves work efficiency, and has been recommended by ergonomics experts
5. Good comprehensive economic benefits: Compared with ordinary carbon steel, the overall cost of fiberglass grating is low, although it is disposable The investment is higher than ordinary carbon steel. Due to its long service life, it can generally be used for twenty years without maintenance, so its comprehensive economic benefits are much better than using carbon steel. 6. Easy installation: use fiberglass grating The weight of the components is greatly reduced, thus reducing the weight of the supporting structure. There is no need to use lifting equipment during installation, which is both economical and convenient.
7. Safety: During the installation and use of fiberglass gratings, sparks will not be generated due to collision, and are especially suitable for use in flammable and explosive environments. In addition, gratings with anti-slip surfaces It can prevent slipping and reduce accidents.
_Copy 3