Centrifugal air compressor gasket | Henan Haijie centrifugal air compressor overhaul

Centrifugal air compressor gasket | Henan Haijie centrifugal air compressor overhaul As a after-sales service provider for centrifugal air compressors, Henan Haijie has always believed that high-quality air compressor accessories are the basis for ensuring the normal operation of air compressor equipment. Due to the need for centrifugal air compressor maintenance and driven by profits, a variety of imported engineering air compressors and air compressor accessories have appeared on the market, but the quality is uneven. The centrifugal air compressor has temperature, which is normal. However, if the temperature of the screw air compressor is too high, it will attract our attention, because in this case, it often means that your screw air compressor is faulty, so we need to stop it immediately for inspection. As for which places to check, the editor will introduce them to you here. Maintenance of high temperature of centrifugal air compressor: The premise is that the temperature of the machine room is within the permitted range and the oil level is in a normal state. First, confirm whether the temperature measuring element of the screw air compressor is faulty. You can use another temperature measuring instrument to calibrate it. If it is confirmed that there is no problem with the temperature measuring element, then check the temperature difference between the inlet and outlet of the oil cooler. Normally it is between ~ degrees.
The motor current of the cardiac compressor rises sharply instantly. It is easy to accumulate water, and the exhaust valve does not open during the cooling period, or it is opened at the wrong time. They will provide a breathable passage when the air compressor stops pumping air to avoid back pressure in the crankcase, and also provide convenience for air moisture to enter the crankcase. The air filter of the air compressor uses an oil-infused mesh filter element. It is to keep the flow rate of the compressor always greater than a certain value to avoid operating in the surge zone. The advantage of this method is that the control system is simple and fewer instruments are used. The selection of air compressor is mainly based on the working pressure and flow rate of the pneumatic system. There are many types of air compressors, such as screw air compressors, piston air compressors, centrifugal air compressors, scroll air compressors, etc. Screw air compressors have great market potential and are used in many applications. It is widely used in the industry. In the air compressor safety management system, the pressure sensor implements side airbag control. Air compressor safety management systems are also areas where sensors are widely used. There are two options for controlling the side airbag of the air compressor: acceleration sensor and pressure sensor.