- 功率:
- 0.3W
- 电压:
- 5V
- 型号:
- 5050
<
Shenzhen Jiexin Technology Co., Ltd.
is a company specializing in lighting solution products, urban landscape lighting products, lighting products, drivers Control solution design, product development solution company. The company integrates R&D, production and sales, with a wide range of products (colorful lamp beads, colored flexible light strips, point light sources, flexible pixel screens, full-color controllers, etc.) with guaranteed quality and affordable prices. . .
Shenzhen Jiexin Technology Co., Ltd.
Since the first day of its establishment, it has put the concept of service first, from discussing market directions and trends with customers to assisting customers in planning product series. We have accumulated rich experience in marketing promotion methods, helping customers design products, and assisting customers in dealing with abnormal phenomena in production and application. In order to continuously meet and exceed customer needs, we use a professional team to continuously penetrate into customers and the market, timely analyze and judge customer product upgrade needs and future market changes, and continuously develop innovative products to create value for customers.
Contact: Mr. Liang
.Position: Business Manager
. :
Mobile phone
.Telephone:--(Business Department)
.Fax:
.Address: Floor, Longma Science and Technology Industrial City, Shixin Community, Shiyan Street, Baoan District, Shenzhen
Need light strip pictures/specifications ( (Without contacting the company) You can contact Taobao customers or contact our company by phone to customize unconventional light bars, formulate plans, etc.
<
3. Product introduction
.Built-in lamp bead: The traditional driver is integrated and packaged inside the lamp bead, and all lines are replaced by gold wires. This not only saves space and reduces the failure rate between pads, but also shortens the transmission distance and makes the transmission speed faster and more efficient. Stablize. . .
. The traditional full-color series products need to drive lamp beads. The most important thing is that they need a large number of capacitors and resistors, and then use circuit boards to combine the electronic components one by one. In the middle, they go through countless lines, through holes, copper sinking, and countless pad. . . Although it is only a small finished product in the hands of the customer, it has gone through countless processes to complete. It is inevitable that there will sometimes be some small flaws in the middle, which is a problem of failure rate. The emergence of built-in lamp beads completely solves this traditional problem. It dramatically shortens the distance between the driver and the lamp bead, easily eliminating the headaches and inevitable problems that the majority of boss electronic engineers will have.
- 3 Product Features
. . ● Intelligent reverse connection protection, reverse connection of the power supply will not damage it.
. .● The control circuit and the point light source share a common power supply.
... .- .● The control circuit and chip are integrated into a packaged component, forming a complete externally controlled pixel.
... .- .●
Built-in signal shaping circuit. After any pixel receives the signal, it undergoes waveform shaping and then output, ensuring that line waveform distortion will not accumulate.
... .- . .●
.Built-in power-on reset and power-off reset circuits.
... .- .●
The three primary colors of each pixel can achieve multi-level brightness display, complete true color display of three colors, and the scanning frequency is no less than 100%.
... .- .●
Serial cascade interface can receive and decode data through a signal line.
... .- .●
When the transmission distance between any two points does not exceed meters, there is no need to add any circuits.
... .- .●When the refresh rate is 3 frames/second, the number of cascades is not less than 1 point.
... .- . .●The data transmission speed can reach b.
... .- .●The color of the light is highly consistent and cost-effective.
... .- < - 3.-Product advantages
.$. The brightness of the built-in lamp beads is higher than that of ordinary lamp beads
.$. The consistency of the three-color chips in all lamp beads Good
.$. Built-in driver performance is stable
.. Hard plastic packaging is used to prevent extrusion damage
.$. The product is affordable with absolute quality assurance
- 3 products Composition
. It is an intelligent externally controlled light source that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a lamp bead, and each component is a pixel. The pixel contains an intelligent digital interface data latch signal shaping amplification drive circuit, a high-precision internal oscillator and a programmable constant current control section, which effectively ensures that the color of the pixel light is highly consistent.
. The data protocol adopts the single-line return-to-zero code communication method. After the pixel is powered on and reset, the terminal accepts the data transmitted from the controller. First
. The b data sent is transferred to the first After the pixel is extracted, it is sent to the data latch inside the pixel, and the remaining data goes through the internal shaping processing circuit
After shaping and amplification, it starts to be forwarded and output to the next cascaded pixel through the port. Each time it passes through a pixel transmission, the signal is reduced by b. The pixel
adopts automatic shaping and forwarding technology, so that the number of cascades of the pixel is not limited by the
signal transmission, but is only limited by the signal transmission speed requirements.
It has the advantages of low voltage drive, environmental protection and energy saving, high brightness, large scattering angle, good consistency, ultra-low power, and ultra-long life. Integrating the control circuit
on it makes the circuit simpler, smaller in size and easier to install.
- 3 size reference
- Characteristic parameters
-
. <> - Luminous color
<> - Dominant wavelength
<> - Luminous intensity
/> <> - Working current
<> - Working voltage
<> - Red light
<> -
<> -
<> -
<> -
<> - Green Light
<> -
<> -
<> -
<> - 3
<> - Blue Light< br/> <> -
<> -
<> -
<> - 3
- <
-
- < < br/> -
- <