Year1
- 机器外形尺寸：
- 3950*2920*4188
- 最大吊重：
- 300KG
Product introduction:
Host overall dimensions:**
Separator motor:
Machine lighting: energy-saving lamp
Separator air volume:< br/> Working pressure: (/)
Dust removal method: bag dust box/pneumatic automatic/manual dust removal
Scope of application
:
Pre-treatment of electroplating and spraying to improve attachment Focus on heat treatment, scale removal, residue removal, rust removal, oil removal, refurbishment of old parts, all ceramic products, glass products, plastic products, polishing and atomization of all types of molds, castings, stamping parts, metal and non-metal surfaces Surface treatment of all metal products, glass, plastic crafts, jewelry, glasses, watches
Product Features
:
This series of machines is self-contained, easy to operate, environmentally friendly and clean. It can be equipped with an automatic drying device, as well as cleaning and matte processing of electronic product molds.
Novel design, scientific structure, easy operation, good processing efficiency, low energy consumption and automatic sand return. The cyclone separator can combine dust and sand separation with the same industry technology from the United States and Japan. The fine sand separation effect is excellent and minimizes The main components for abrasive loss are made of high-quality imported parts and have a long service life.
Remarks on the above model, dust removal method: bag dust box, air source requirements: pressure BR (/square meter) flow rate. cubic meter/
Safety operating procedures:
Sandblasting machine is a modern A cost-effective casting cleaning equipment with the highest efficiency and low investment, the sandblasting machine is usually used for surface rust removal of corrosive materials or workpieces, and descaling of non-rusty metals. In daily work, the operating procedures of the sandblasting machine are directly related to safe production.
Safe operating procedures for sandblasting machines:
The gas tank, pressure gauge, and safety valve of the sandblasting machine must be calibrated regularly. The air storage tank is discharged with dust every two weeks, and the filter in the sand tank is inspected once a month.
Check whether the ventilation pipe of the sandblasting machine and the door of the sandblasting machine are sealed. Five minutes before work, the ventilation and dust removal equipment must be started. When the ventilation and dust removal equipment fails, the sandblasting machine is prohibited from working.
. Protective equipment must be worn before work, and the sandblasting machine is not allowed to be operated with bare arms.
. The compressed air valve of the sandblasting machine should be opened slowly, and the air pressure should not exceed.
The sandblasting particle size should be adapted to the work requirements, generally between No. 10 and No. 20, and the sand should be kept dry.
When the sandblasting machine is working, unrelated persons are prohibited from approaching it. When cleaning and adjusting the running parts, the machine should be stopped.
. Do not use compressed air from a sandblasting machine to blow dust off your body.
After the work is completed, the ventilation and dust removal equipment of the sandblasting machine should continue to operate for five minutes and then shut down to discharge indoor dust and keep the site clean.
In the event of personal or equipment accidents, the scene should be kept and reported to the relevant departments.
Telephone:
Address: No. Xiangxing Street, Xinmin Community, Chang'an Town, Dongguan
WhatsApp
