Year1
- 售后：
- 现场指导
- 价格：
- 优惠
- 性价比：
- 高
- Medium-sized combined building formwork can be used for wall formwork. Since high-rise building groups of the same type generally have unified requirements, medium-sized combined building formwork helps ensure a higher usage turnover rate.
-The core tube of super high-rise or high-rise buildings should be used
-Hydraulic climbing formwork
- The climbing formwork technology combines the respective advantages of large formwork and sliding formwork , it can rise layer by layer with the construction of the structure, the construction speed is faster, it saves space and tower crane lifting times, it is safe to operate at high altitudes, and no external scaffolding is needed. In terms of construction, it is especially suitable for the construction of concrete inner cylinders of steel structures.
- It is recommended to use the entire multi-layer board for floor building formwork, and try to use phenolic-covered ones
~
- Thick multi-layer building formwork. The edges of this kind of building formwork are damaged after repeated use, and they must be cut in time to ensure that the edges of the multi-layer panels are smooth
-The background behind the birth of new shear wall supports
-On current construction sites, The formwork support of shear wall structure and frame shear structure uses square wood as vertical bars and two steel pipes as horizontal bars, which are fastened by through-wall screws and mountain-shaped clamps. The typical characteristics of this system are high cost, serious waste, unsafe, unstable and unable to be adjusted. The resulting wall is not smooth enough and is prone to slurry leakage. Especially at entrances and corners, template fixing is more troublesome.
-The waste is reflected in the fact that the length of the square wood cannot be adjusted according to the length of the internal and external walls, basement and standard floor. The waste of joints cut by carpentry is serious. The steel pipe cannot be adjusted according to the length of the wall and needs to be cut, which is wasteful. It's also more serious.
-In response to the above problems, Tianjian Industrial has developed and improved a new shear wall support system, using telescopic vertical beams made of cold-rolled steel and cross beams of different specifications (
,.,., .,.,
-m). The vertical beams can be freely expanded and contracted between
- meters (can be customized according to customer requirements), and the cross beams can be connected through
- and
- meters joints, which fundamentally It solves the problem of sawing and cutting materials when the wall width and height are different. Since this product is made of cold-rolled steel and is treated with electrophoretic paint on the surface (a type of automotive primer), the service life of the support system is greatly extended, and the number of turnovers is more than
-, which solves the problem of wooden cubes. Extremely high cost issue. The properties of cold-rolled steel are corrosion resistance, high elasticity and high pressure bearing. Therefore, after being fixed with wall screws and cross gaskets, they will not expand and contract due to weather like square timbers, directly ensuring the flatness and safety of the shear walls and columns. The best treatment of the new support system is the treatment of wall corners and entrances. The design of yin and yang corners and entrance clips solves the problems of the traditional shear wall support system. While ensuring the ripples and angles, it prevents slurry leakage at the corners. The phenomenon of pulp running occurs.
WhatsApp
