Test work before using paper tube machinery and equipment

It is very necessary to test the machine before using paper tube machinery and equipment. This is also to prevent failures during operation and improve work efficiency. Let’s follow the editor to find out:
Choose the standing place according to the size of the cardboard produced by the paper tube machinery and equipment. Find a piece of waste cardboard to block the cardboard to be separated. The cardboard blocks the cardboard and the separated front end. Parallel to this is to start the power supply and turn on the controller switch of the paper tube mechanical equipment to idle for thirty seconds. If there is no abnormality, the test machine will start pushing out a piece of cardboard in parallel with both hands based on the baffle. Turn off the power switch and be sure to stop it when cleaning the paper tube machinery and cleaning the edges. Be sure to stop the machine when adjusting the up and down distance between the paper separating knife and the crimping wheel shaft of the paper separator. Be sure to stop the machine when adjusting the position of the baffle. Be sure to stop the machine when inspecting the cardboard after the paper separation and crimping line. Be sure to stop the machine when adjusting the crimping wheel. When moving the cardboard. The paper tube machinery and equipment is equipped with an automatic cutting device, and the cuts are neat and without warping. The cutting length can be adjusted as desired. It has a self-locking function and can automatically lock without shaking after adjusting the angle of the swing arm. During the first half hour of operation of the paper tube machinery and equipment, the equipment will be continuously inspected. If any problems are found during the random inspection, they should be identified in time to solve the problems so that the areas that should be paid attention to will be clearer in the next production. Of course, during normal operation, each time the material is picked up, further random inspections of the paper tube machinery and equipment will be carried out.