Year1
- 规格：
- YSL-17
- 型号：
- 17
- 产地：
- 台湾
<:
series are two-axis independent control
<:
CNC inclined back horizontal lathes. Use the
<:
controller to control the lathe's
<:
axis
<: (
feed axis
<: )< br/> and
<:
axis
<: (
turning length moves axis
<: )
. The machine tool adopts a slant-back design. The workpiece spindle tailstock and saddle are on the same plane, making center correction easy and easy to maintain. This unit is cast in one piece, and its rigidity is far superior to that of a two-piece design.
<:
Both the shaft and
<:
shaft are designed with hard rails and inclined wedges, and are reinforced with
<:
wear-resistant sheets to ensure Extend track life. Before all machines leave the factory,
<:
the axes will undergo repeated positioning accuracy tests and records. They will move back and forth three times and touch the measuring point of the multimeter once. Each machine will move back and forth< br/><:
times and recorded
<:
times. The repeated positioning accuracy must be within
<:
to pass the quality inspection.
r r
: Series
: CNC inclined-back horizontal lathe, reinforced rib box design, cast with Meehanite cast iron to ensure high machine rigidity and stability as well as machine quality and service life. . High rigidity machine configuration
: Spindle
(
: Through hole
/
: Bar through hole
/ r)
: < br/> : Inch hydraulic chuck and
: Spindle motor, can easily perform single-edge
: Heavy cutting operations with deep cutting depth, shortening processing time. Fully sealed sheet metal and large working sliding doors provide sufficient operating space and ensure operational safety.
rr
: Standard model configuration
: Servo hydraulic turret with tool position, can be equipped with
: turning tool or
: boring tool and other non-powered tools, significantly reducing manual tool changing and setting time.
: The powered turret model is equipped with
: Tool position
: Axial powered turret, equipped with
: Workpiece spindle and workpiece spindle braking system, which can be It can easily complete various processing operations such as turning, milling, drilling, and tapping under the condition of a single clamping. It does not require multiple pieces of equipment to process and clamp multiple times, and it can also improve the accuracy of the product!
: Series lathes are definitely your best and most economical solution.
: Hydraulic servo turret
: The cutterhead uses servo motors for precise positioning
: Special servo motor design for cutterhead rotation and segmentation
: High torque, low noise
: The three-piece curved gear coupling uses a hydraulic cylinder for disengagement and engagement
: Fast and accurate tool change Action
: Powered tool turret
: Axial tool holder
: Power coupling type
: Dual motor design, positioning drive And power tool drive
: Equipped with overload protection device, ultra-high-speed positioning
: Hydraulic locking system
: With spindle, it can be drilled It is used for various processing operations such as tapping and milling, and is equipped with a ring decoder and a high and low pressure disc brake system to stabilize the spindle rotation and positioning accuracy.
: Standard equipment:
: Three-jaw chuck and hydraulic rotary cylinder
: Controller
: Electrical box heat exchanger
: Automatic lubrication system
: Hydraulic system
: Chip conveyor
: Cooling water system
/>
: Fully sealed machine guard
: Work light
: Optional accessories:
: Upgrade
: Three-jaw chuck and hydraulic rotary cylinder
: Upgrade
: Controller
: Electrical box air conditioner
/>
: Axial optical ruler
(
: Accuracy
)
: Axial optical ruler
(
: Accuracy< br/> )
: Tool measuring device
: Front material receiving device
: Automation equipment
(
: Robotic arm material tray, etc.
)
: Special fixture
r Maximum rotation diameter of the bed surface
r Maximum rotation diameter of the saddle surface< br/>
r Maximum processing diameter
r Maximum processing length
r Spindle nose
r Spindle through hole
( )
r Bar through hole
( )
r Chuck size
(
:
)
r Spindle motor output power
r Spindle speed
r
WhatsApp
