Wrought iron gate construction

1. Construction preparation: The finished wrought iron gate must have a factory certificate and test report when it enters the site. Its specifications, models, and dimensions should all meet the design requirements. Place the window code in a safe place and cover it with wood. Avoid making mistakes or it will be difficult to cooperate with customers later.
Bounce the position line of the wrought iron gate and determine the installation elevation according to the horizontal line.
The unpacking, inspection and transportation of wrought iron gates are even more important because customers do not want the wrought iron gates to be damaged during transportation. Check the model and check the quality of the wrought iron according to the requirements of the drawings. If you find missing edges, corners, warping, uneven deviations that exceed the standard, serious damage, scratches, or large differences in appearance, you should consult carefully before installing it after being repaired and appraised. Also, check whether the wrought iron gate is glued on or not. If the protective film is defective, it should be repaired before construction and installation. Prepare scaffolding for installation and take safety precautions. Because safe production is the principle we have always pursued.
2. Construction points:
Hole treatment for wrought iron gates:
The wrought iron installation adopts the installation method of reserving the hole and then plugging it. The horizontal position of the wrought iron opening should be straightened using the wall line as the standard and back up to the elastic line of the lower skin elevation of the window. In order to ensure that the upper and lower windows of each floor are connected, a theodolite is used to hit straight lines on both sides of the wall. Leave - on each side of the gap between the plastic steel art frame and the wall.
The connection between the wrought iron gate and the wall:
The frame of the wrought iron gate is connected to the wall with fixed iron parts. That is, use self-tapping screws to install the iron parts in the slots on the outside of the window frame, then put the wrought iron door frame into the hole and position it through the reserved holes in the iron parts. Drill holes in the relative position of the wall and insert the expansion tube to tighten the expansion tube. Pipe screws secure the iron parts to the wall.
In fact, simply speaking, it can be boiled down to the following three points:
1. Material inspection
2. Quality inspection form
3. Concealed engineering
Purchasing instructions:< br/> Please confirm the style, size, color and other special requirements with the store owner in detail before purchasing.
. Buyers please check the goods carefully when receiving the goods. If there is any problem, contact the store owner immediately for coordination and resolution.
European iron products have a retro style. Each style has traces of hand-making, so strictly speaking, each style is different.
We can customize wrought iron products of various styles, sizes and colors upon request. Exquisite craftsmanship and fast delivery. Please consult the owner for details!