Construction lifts should memorize the safety requirements for disassembly

The installation of construction lifts is very important. Poor installation will cause equipment operation problems. However, the disassembly of construction lifts is also very important. Today, the editor will summarize the safety requirements for the disassembly of construction lifts. I hope it will be helpful to you! .The disassembly site should be cleared and surrounded by sign poles to prohibit non-staff from entering.
.Add a safety net if necessary to prevent objects from falling above the disassembly site.
.There must be a dedicated person responsible for unified command during the disassembly process.
.When the elevator is running, the head, hands and other body parts of the personnel must not be exposed outside the safety fence.
.If someone is working on the guide rail frame or wall-mounted frame, it is absolutely not allowed to start the lift. It is strictly forbidden to enter the outer cage when the cage is running.
.The parts on the cage must be placed stably and must not be exposed outside the safety fence.
. Overloading is not allowed when using a boom for installation. The boom can only be used to install and disassemble lift parts and cannot be used for other purposes.
.Do not operate the cage when there are objects hanging on the boom.
. Installation workers should follow the safety requirements for aerial operations, including wearing safety helmets, seat belts, non-slip shoes, etc. They should not wear overly loose clothes and should wear work clothes to avoid being involved in running parts and causing safety accidents.
.During the disassembly process, the top of the cage must be operated and operations inside the hanging cage are not allowed.
.Before starting the cage, a comprehensive inspection should be carried out to ensure that the elevator operating channel is unobstructed and all hidden dangers are eliminated.
.It is absolutely not allowed to exceed the rated disassembly load capacity during disassembly operation.
.Disassembly operations cannot be carried out in thunderstorms, snowy days or severe weather with wind speed exceeding //.
. When the elevator is running, follow the notes to connect the grounding device and the metal structure of the elevator with a grounding resistor.
. Disassembly operations at night or after drinking are strictly prohibited.
.A speed limiter drop test must be carried out before disassembly.
Construction lift manufacturer Beijing Jiuhong Heavy Industry. Looking forward to your visit and guidance!