Jiangyin Bosch Outstanding Product PLC Cable Tray Unit Ladder Edge Forming Unit

轧制带钢宽度：

100mm≤§≤860mm

板材厚度：

1-2.5mm

成型速度：

10～15米/分钟

Forming process
Uncoiling r Leveling r Pinch-feeding, punching r Forming r Lengthing, cutting r Recycling
Equipment structure overview:
This production line can produce different specifications of cable trays by replacing the punch dies. The roll bending machine uses a combined and adjustable set of rolls to complete all specifications of the bridge product specifications. Changes in product specifications are completed by adjusting the opening gear and rolls of the forming machine.
Equipment performance
Cable trays with various strip widths and specifications can be rolled according to production needs.
Production speed during online punching: .~m/min.
Continuous molding speed of molding equipment: ~m/min.
Board material thickness: -.
Material requirements: low carbon steel, galvanized steel strip coil.
The production line has two operating modes: automatic and manual, which can realize linkage and segmented operation.
At present, our company has successfully manufactured:
Cable tray cold-formed steel unit.
.Pedal series cold-formed steel unit
.Shelf series punching and forming unit.
.Steel structure series cold-formed steel unit.
.Light steel keel series profile cold bending forming unit.
.Full-set molding production line for highway guardrail panels.
./Interchangeable forming machine
.Electrical frame forming machine
.Scaffolding forming machine
.Pedal forming machine
.Elevator guide rail forming machine
.Anode plate production line
Door frame forming machine
Solar photovoltaic bracket forming machine
Large supermarket shelf forming machine
Main components of the equipment
The complete set of equipment consists of an uncoiler and a leveling machine , servo feeding device, - punch, die, guide frame, molding host, fixed-length cutting, receiving table and electrical control and other components.
The equipment produced by our company has the following advantages:
. Equipment control is designed to control multiple safety protections during normal production.
.The bed is a steel plate welded part. It is also tempered to eliminate internal stress and avoid deformation of the fuselage.
.The formed frame is of cast iron structure and tempered. High strength and long service life.
.The material of the roll shaft is 100% and the hardness after quenching and tempering treatment is 0.1%.
.The material of the forming mold is quenched. Hardness: ℃.
.The transmission structure is gearbox transmission. Each molding frame has a gearbox to ensure that the equipment operates at high intensity over time and has a long service life.