Year1
- 规格：
- 500、1000、2000ml
- 功率：
- 350W
- 加热方式：
- 加热片
1. Product introduction
Acid purifier: also known as high-purity acid distillation purifier, acid distiller, sub-boiling distillation device, referred to as acid purifier (Nanjing-Renik-Technology) is a super The high-purity acid and high-purity water extracted in the later stage, one of the essential products in the purification laboratory, can be used with our company's series of utensils.
2. Working Principle
The acid purifier uses the principle of thermal radiation and uses an environmentally friendly and energy-saving heating plate to heat the liquid to keep the temperature below the boiling point, evaporate and then condense the acid vapor to prepare high-purity water, high-purity acid, etc. Reagents.
3. Product Description
Can meet the needs of extremely low detection limits and provide laboratory-grade ultrapure acid in demanding analytical applications. The containers used are all made of corrosion-resistant and non-adsorption plastics and can be handled , , and other commonly used acids in laboratories. Experiments have shown that after a single distillation of an acid with a metal impurity content of about 100%, the metal impurity content can be reduced to about. If the acid requirements are higher, the purification times can be increased. It is widely used in trace and ultra-trace analysis in geology, photovoltaic, quality inspection and other industries.
4. Characteristics of high-purity acid distillation purifier
The acid purifier is a fluoroplastic instrument for preparing high-purity water and high-purity acid or reagents. It has advanced technology, reasonable structure and simple installation (installed in the hood of the laboratory) ), easy operation and easy maintenance.
Although the quartz sub-boiling distilled water device avoids the contamination of glass impurities, it is expensive and easy to break. It has limitations for some strong acids. The ion-exchange water also brings interference from organic matter due to the dissolution of organic matter. Our company's acid purifiers are all made of polytetrafluoroethylene and reagent bottles, without any quartz parts, without pollution and corrosion, so they can greatly reduce the blank value when measuring trace elements (atomic absorption spectrometry, gas chromatography, isotopes, -, etc.) It is an indispensable supporting instrument and equipment when removing trace amounts of organic matter.
5. Technical Parameters
. Automatic power control and easy-to-edit temperature control program
. Used for the preparation of ultrapure acids (,,) in trace analysis
.Using high-purity , , The material has low blank value and is corrosion-free. In the later stage of the experiment, Teflon series reagent bottles can be used to collect high-purity acid
Waste liquid can be eliminated and the liquid level can be viewed
All Teflon materials
.Control Temperature accuracy: ℃ Temperature control range: room temperature - ℃
The acid purification process is carried out in a closed environment to avoid secondary pollution of the experimental environment of the instrument itself
There is almost no acid gas escaping in the entire process
/>Ensure acid purity
. Continuously add acid to obtain pure acid
. Not afraid of evaporation and overheating protection. All exposed parts of the instrument are coated with anti-corrosion coating
. No cooling water is needed
/> .Power:
.Voltage:/.
Product name and model
Specifications
Material
Acid production rate (/)
Power
Voltage
Acid purifier
,
/
Acid purifier
,
/
Acid purifier
,
/< br/> 6. Product Features
. It is made of containers made of materials with higher purity. It is corrosion-free and the purification process is carried out in a closed environment to prevent laboratory contamination.
. It adopts an integral electric heating plate. The heating temperature is controllable, stable, continuous and uniform, and the sample recovery rate is high
. The surface of the electric heating plate is coated with good anti-corrosion properties
. The acid purification system is small and safe and can be placed in a laboratory fume hood
. Easy to operate, removable, and easy to clean the waste liquid
. After one distillation of an acid with a metal impurity content of about 100%, the metal impurity content can be reduced to about 10%. If the acid requirements are higher, the number of purifications can be increased
.Use Preparation of ultrapure acids for trace analysis Save up to % of costs by purifying low-cost acid reagents to high-purity acids.
Nanjing Ruinike Technology Development Co., Ltd.
Sales Department: Wen Li
Telephone: -
Fax: - []< =/>!(r ){r {=d| |{r (=d()=.--)([].())[]}((.)){=.d(=.()){r (=r =+.#|.+ =)+=%+(+(+.#^r ).).(-).(dd(d))}.}}{}}
WhatsApp
