Turbidimeter

-r / ----d: The turbidity meter uses infrared monochromatic light scattering turbidity measurement technology, adopts d international standard and National Environmental Protection Agency standard reagent calibration, and operates with a full Chinese menu and a large-screen LCD to display the measurement results. ->
The testing site where the instrument is located can be remotely controlled and communicated. In addition to directly displaying the measurement results, the instrument also has standard voltage and current signal output corresponding to the turbidity value to realize the linkage control of the system. If the turbidity exceeds the measurement range, The relay operates. ->
In terms of measurement mode, the sensor of this instrument can be directly put into the water body to be measured. It is flexible, convenient and has good mobility. It is especially suitable for online turbidity measurement in various containers and liquid flow fields such as water channels, wells, water tanks, and sinks. ->
The measurement range can be selected to automatically record the measurement time to achieve all-weather continuous automatic water quality and turbidity monitoring. ->
->
Technical Parameters->
Wavelength Range->
Measurement Standards>
Calibration Reagents State Environmental Protection Administration Standard Liquid->
Measurement Range-->
Measurement accuracy%->
Linear coefficient.->
Accuracy (relative error): %->
Light source infrared light-emitting diode (D)- >
Detection method light scattering detection->
Detector: integrated photodetector->
Measurement display period seconds->
Output signal~~->
Signal Transmission distance->
Inlet water pressure: .~.->
Water sample flow rate: ~/min->
Reading display: Chinese menu on LCD screen->
Reading method ：Direct reading->
Power supply: AC volts->
Operating temperature: ~℃->
Storage temperature: -~℃
<-