Apple Decoration teaches you the ultimate guide to the steps of decorating your new house

The decoration steps of rough houses are also a matter of great concern to many people. Especially for friends who are decorating for the first time, it is necessary to have a simple understanding of the steps of decorating rough houses before doing house decoration work.
(1) Tool preparation
Put several things that must be prepared before decoration in your bag. Measuring tape (you don’t need to buy it), calculator, large board clips (for holding slips and receipts). In addition, it is best to prepare old towels (soft cotton ones for wiping bricks after laying bricks) and plastic bags (wrapped around them) at the construction site in advance. Pipe joints can be prevented from being clogged with dirt)
(2) Choose a good and auspicious day to start construction
Before workers enter the site, it is best to measure every corner of the home in person and take a pen and ruler to write it down and mark it clearly. Don't be lazy. The measurement content mainly includes: tile area, wall paint area, wallpaper area, and floor area.
(3) Main body demolition and renovation
Main body demolition and renovation is the first project to be carried out, which mainly includes demolition of walls, building walls, shoveling wall coverings, removing heating, replacing plastic steel windows, etc. The garbage after demolition and modification should be cleared out in time to ensure the cleanliness of the interior for the convenience of construction.
(4) Water and electricity renovation
During water and electricity renovation, the exact locations of switches, lamps, basins, bathtubs, washing machines, etc. must be determined.
Before the water and electricity renovation, the cabinet designer should come to your home to conduct the first measurement to help you determine the power supply and waterway renovation plan.
For water heaters, it is also best to send someone to design the location of the power supply and interface according to the model you have determined.
(5) Wrapping the risers
Considering the moisture-prone environment of the kitchen and bathroom, the material for wrapping the risers must not be wooden keels, even if the wooden keels are painted with anti-corrosion paint.
(6) Tiling
Before laying tiles, it is necessary to drain the floor well. Pay attention to the floor drain. You must buy a washing machine with anti-corrosion and anti-odor functions or use a special floor drain for shower floor drain.
(7) Oil work
Note: Any carpentry work, even if it is just making a pass, must follow this step and veneer the large core board with sunken bottom veneer before painting.
(8) Wallpaper
Note: Do not open the windows for ventilation within an hour after the wallpaper is applied and let it dry slowly.
(9) Install the socket panel
Note: It is best to buy sockets with switch functions, especially in the kitchen, so that rice cookers and microwave ovens can be controlled by switches without plugging and unplugging the power supply.
(10) Installation of kitchen and bathroom ceilings and cabinets
Install the water heater and bathroom heater first and then seal the edge of the ceiling to better cover the water heater.
Nanning Apple Decoration Yellow Rain