Year1
- 型号：
- 212
- 规格：
- 212
- 类型：
- 1221
Instructions for use:
Before use, make sure to charge the battery in the remote control box for enough time to keep the voltage of the power supply at -. between.
. On the road section where the interception mission is required, open the right side lid of the roadblock packaging box and roll out the roadblock roll. Take off the elastic hook used to fix the roadblock and lean it against the side of the roadside and roll it towards the road surface where the vehicle is to be intercepted.
To connect the wiring between the remote control box and the roadblock head, insert one end of the two-meter three-core connection cable into the connection jack of the roadblock head and the other end into the three-core connection jack of the remote control box.
Open the upper cover of the remote control box and turn the power switch to the built-in power supply. The power indicator light is on. When the device enters working mode, pull out the left receiving antenna and raise it up to increase the receiving distance.
When you need to perform the task of intercepting the suspect's vehicle, press the big button on the top of the remote control. There will be a beep in the power box, and the stainless steel hollow needle in the roadblock will automatically stand up. At this time, if you forcefully pass through the roadblock, the wheels will be pierced for several seconds. A stainless steel punctured hollow needle tire deflates immediately within two seconds and cannot continue driving but can only stop.
After the interception mission is completed, press the small button at the bottom of the remote control to raise the stainless steel hollow needle to rotate back to its original position and enter the standby state.
Recycling of remote-controlled vehicle blocking roadblocks. Roll the roadblock block into a round shape and use elastic hook straps to secure the roadblock block. Turn off the power switch of the remote control box and place the remote control box into the empty space in the middle of the roadblock block. Hold the roadblock box body with your left hand and your right hand. Roll the roadblock block into the box, put in the connecting cable, and fasten the box cover.
This remote control roadblock is also equipped with an external power connection cable. When the power supply voltage in the remote control box is insufficient and cannot work normally, one end of the car connection cable can be inserted into the external power connection jack of the remote control box and the other end can be inserted into the car cigarette lighter. Turn the power switch of the remote control box to the external power supply position. The operation is the same as the above.
If you have discounts for bulk orders, please call us!
Contact Miss Wei
Telephone
Company address: Nanguo Trade City Building, No. Baisha Avenue, Jiangnan District, Nanning City, Guangxi
WhatsApp
