Year1
- 型号：
- 3T 5T 8T
- 原动力：
- 柴油机 汽油机
- 自重：
- 115/130/140/160kg
1. >
Product name: Motorized winch, its types are roughly divided into diesel-powered winch, gasoline-powered winch (), tractor winch (,) and [hand-held motorized winch] Grinding】
2. >
Uses of motorized winching mill: The He-type motorized winching mill is a construction tool for erecting aerial high-voltage transmission lines and laying underground cables. It can be carried out smoothly and conveniently under various complex conditions. It can be used for lifting and pulling when assembling pole towers and erecting guide (ground) wires. It can also hoist and pull heavy objects in buildings, docks and other places. It has been proved by experiments and actual on-site effects that it has the advantages of combined rationality, small size, light weight, high power, flexible operation, and convenient transportation, and is very popular among power workers.
3. >
Specifications of motorized grinding mill: Output forward rotation: slowest linear speed rev/min and fastest speed rev/min. Output reversal: slowest linear speed rev/min, fastest speed rev/min. The overall dimensions (length, width and height) of the motorized winch grinder (mm). Weight: Dimensions (length, width and height) (mm). Weight:
4. Structure and working principle
Power of the motorized winch mill: Diesel Power: Horsepower, speed: rpm Diesel power: Horsepower, speed: rpm
5.>
Transmission mode and transmission:
The power and transmission gearbox is driven by two type V-belts and two type-B type V-belts, and is equipped with a transmission clutch. Enter the gearbox counterclockwise speed in rpm. After being changed by the speed change gearbox, the following speeds are output respectively:
Forward rotation/min rpm
Reverse rotation/min rpm
6.>
Brake:< br/>There are two braking devices: automatic clamp brake and clutch transmission interlocking brake, which can brake in both forward and reverse directions.
7. >
Hand-crank device:
During the working process of the winch grinder, if the prime mover fails and the hoisted object cannot be moved up or down, the hand-crank device can be used. device to continue hoisting the hoisted object or return it to the ground.
8. Lubrication method:
All parts in the transmission gearbox are lubricated with engine oil, and the outer bearings are lubricated with butter.
)>
Operation method:
,>
Before starting the machine, you must first open the transmission clutch of the winch grinder, and move the front and rear shift levers to the neutral position before starting the machine.
,>
When turning the clutch, the action should be quick, otherwise the interlocking brake will not work, causing an increase in the impact force of the automatic brake pawl. It is not advisable to use too much force when starting the machine, until the pulley can drive the input shaft to rotate without slipping.
,>
The transmission clutch must be opened when shifting gears, otherwise the gears will be damaged. After shifting, check whether the gear is firmly engaged to prevent gear skipping.
,>
If it is difficult to enter the gear during the shifting process, you cannot force the gear into the gear. You can use the hand crank device to help the gear shift. Specific methods: Use a wrench to turn the hand crank device to rotate it. At an angle, you can enter the gear.
,>
How to install the wire rope:
>
Open the drum clutch, thread the wire rope end around the drum to tighten it, and then close the clutch.
>
Disassemble the bearing support movable seat at the outer end of the drum, wind the wire rope around the drum and tighten it.
>
Wire rope winding method: thread it from bottom to top, that is, the incoming rope is at the bottom, facing the drum, winding counterclockwise, the incoming rope is close to the end of the prime mover, winding, (type winding), if Otherwise the brakes will not work.
The motorized winch has a one-year warranty, a great value choice!
WhatsApp
