Internal combustion rail saw machine NQG-1250 picture gallery

Complete pictures of internal combustion rail sawing machines
--Jinzhou Shuangxing# Twenty years of professional manufacturing
Contact person: Ms. Fu
Address: Songpo Road, Linghe District, Jinzhou City, Liaoning Province
Fax -
Customer consultation
--Strive to create the industry's leading brand #Jinzhou Shuangxing
Internal combustion rail saw machine_price_wholesale_parameters
Since its inception, Jinzhou Shuangxing products have been characterized by excellent quality The product quality, perfect after-sales service, reasonable sales price, good reputation and business philosophy have won the support and favor of the majority of users. The company's products are widely used in coal, petroleum, metallurgy, electric power, chemical industry, machinery and other industries, and are supplied by many railway suppliers and sold throughout the country and Southeast Asia.
Jinzhou Shuangxing focuses on technological progress, adheres to the strategic thinking of science, standardization, and sustainable development, and takes responsibility, gratitude, dedication, and integrity as the company's core values. It has successively won the honors of Private Enterprise Integrity Unit and Price Integrity Unit. We warmly welcome new and old friends from all walks of life at home and abroad to discuss trade cooperation, achieve win-win results and create brilliance together.
Internal combustion rail saw machine_price_wholesale_parameters
Internal combustion rail saw machine technical parameters:
Engine cylinder volume:
Bore diameter:
Stroke:
Idle speed :
Recommended maximum speed: (no load)
Power: .(.)
Fuel capacity: .liter
Grinding wheel diameter:
Applicable rail model technical parameters :/
Cutting time for/rail:~
Internal combustion rail saw machine_price_wholesale_parameters
How to use
First install the thin grinding wheel and check the thin piece before installing it. Whether the grinding wheel has cracks and whether it has been deformed by moisture. Whether the two sides are flat. The surface is uneven, which may cause the incision to deflect and the clamp to be tightened. After installing the disc, tighten the locking nut, but the torque should not be too large to avoid crushing the thin grinding wheel.
Install the rail cutting machine on the rail and pull out the positioning rod installed on the fixture. At this time, the position indicated by the end surface of the positioning rod is the cutting position of the grinding wheel. Move the rail cutting machine to the preset cutting position as needed. Then make the inner surface (convex surface) of the fixture closely contact the top surface of the rail and the lower part of the rail palate and tighten the set bolts. The rail cutting machine is in working condition.
. Pull the joystick with one hand to keep the rail cutting machine above the rail, while holding the other joystick with the other hand to prevent the sheet grinding wheel from hitting the rail.
After installing the rail cutting machine, pull the starting handle to start the internal combustion engine. After the internal combustion engine is started, run at idle speed for no less than 2 seconds to check whether all parts of the machine are normal. If there are any abnormalities, shut down to eliminate them. Increase the throttle and observe whether the thin disc grinding wheel is running smoothly, whether it is deflected, and whether all parts are running normally. If any abnormality is found, the machine should be stopped to replace the grinding wheel or troubleshoot. Before cutting, adjust the throttle and damper to meet cutting needs.
When cutting, the feeding of the thin grinding wheel mainly depends on the dead weight of the rail cutting machine and the swing of the joystick. Therefore, when holding the joystick with both hands, do not exert downward force and swing the joystick rhythmically as needed.
During the cutting process, the joystick should be kept swinging back and forth and should not stop somewhere. When pinching occurs, slowly lift the lamella grinding wheel and continue cutting. If pinching still occurs, stop the machine to check the cause or replace the lamella grinding wheel. When re-cutting, the thin grinding wheel must perfectly match the original incision, otherwise the cutting position should be changed.
If the cut is tilted during the cutting process, the machine should be stopped to check the cause, eliminate the fault, or replace the thin grinding wheel, change the cutting position, and start cutting again.
Usually, the top of the rail is cut first, then the waist, and then the bottom until it is cut off.
When the thin grinding wheel is worn to a certain extent (the diameter of the grinding wheel is approximately less than 10 mm), it may not be possible to cut the rail from one side of the rail. At this time, the grinding wheel needs to be moved to the other side to cut the rail in half until it is cut. When the diameter of the grinding wheel is less than about 100% due to the reduction in linear speed of the grinding wheel, the wear of the grinding wheel will be accelerated. At this time, even if the rail is cut in half, it may not be completely cut off. It is recommended to replace the thin grinding wheel to avoid replacing the grinding wheel without cutting the rail, causing the new grinding wheel to not match the original cut.
Internal Combustion Rail Saw Machine_Price_Wholesale_Parameters
Jinzhou Shuangxing After-sales Service and Delivery Instructions:
, Cost-Effectiveness Instructions:
Our company will not reduce performance under the same product quality conditions , giving the lowest and most realistic price at the cost of changing product parts. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery according to the supply period. If there are special circumstances that require early delivery, our company will organize personnel within a limited scope. Increase production intensity, implement production, installation, debugging, packaging and other processes to strive to meet your company's requirements
Product delivery comes with instructions:
① Product instructions and maintenance manual
② Product certificate
③ Instructions for outsourced parts
④ Consumable parts and their list (the source may vary depending on the model)
After-sales service scope:
The product warranty period is years. During the warranty period, the product is of good quality If there is a problem, our company will provide the fastest repair without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
. Track the product:
Our company will repair the product every month after it is sold. Have at least one technical follow-up visit to track the use of the product and record it so that any problems are dealt with in a timely manner and strive to achieve customer satisfaction.
Jinzhou Shuangxing produces and sells the following products
☆Railway transportation: internal combustion tamping picks, tamping machines, hydraulic rail drilling machines, hydraulic rail drilling machines, manual rail drilling machines, rack type Track starter, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer, universal gauge ruler, rail grinder, square ruler, rail transport car, etc.
☆Track accessories: stoppers Plate, turnout, turnout accessories, turnout tie rod, track gauge ruler, track gauge ruler, track gauge ruler, track gauge ruler, anchor rod, anchor drill rod, pneumatic drill rod, turnout pad, track plywood, road stud, insulating plywood, Crossover switches, pads, composite rubber pads, track fasteners, track clamps, gauge pull rods, rail guard gussets, line gusset bases, insulated gauge rods, gussets, twist drill pipes, coal drill pipes, twist drills Rod, connecting sleeve, chain spreader, wind drill, anchor pallet, pallet, nylon baffle seat, manual switch, manual bender, bender, bending machine, rail pressure plate, fish tail plates, fishtail bolts, etc.
Jinzhou Shuangxing sales network Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Remarks: The above content has related product parameters and pictures provided by Jinzhou Shuangxing Railway Machinery Co., Ltd. for reference only. Specific products may have different sources due to different production batches. Please contact the sales staff for specific details.