Factory direct sales Taifeng bending machine cylinder

The purpose and characteristics of ordinary bending machine cylinders - the internal structure of the series of hydraulic cylinders adopts a turbine worm drive to drive the screw shaft and the adjusting nut to move relative to the spiral axial direction to adjust the working stroke of the hydraulic cylinder, thereby changing the closing height of the upper and lower grinding openings of the bending machine to meet the needs of the sheet metal Working at different bending angles requires features such as repeatable adjustment accuracy, high return speed, fast return speed, and reliable sealing.
Instructions for Selection of Bending Machine Cylinders
According to the size of the inlet and outlet oil ports provided by the - series ordinary bending machine hydraulic cylinders, pay attention to ensuring that there is sufficient working clearance between the slide block of the bending machine and it.
The motor and encoder interfaces connected to the hydraulic cylinder must be consistent with the input and output shafts of the stroke adjustment worm.
The working stroke of the hydraulic cylinder must be greater than the maximum working stroke of the slider of the bending machine and cannot be used over the stroke.
The set pressure of the hydraulic system of the bending machine shall not be greater than the allowed rated pressure of the hydraulic cylinder. If you have special needs, please contact our company's technical department.
The normal traveling speed of this series of ordinary bending machine hydraulic cylinders is recommended/When there are specific requirements for the operating speed, please specify it in the ordering technical conditions.
Customers can choose the encoder base or micro switch base according to their needs.
The external connection dimensions of the cylinder can be modified according to customer requirements.
Other instructions:
-Series of ordinary bending machine hydraulic cylinders can be individually designed and manufactured according to the individual needs of users
Our company has different adjustment methods or structures according to the slider stroke of ordinary bending machines. There are other series of hydraulic cylinders available. Please contact our company's technical department for details.
-The size is the same as that of the normally open filling valve produced by our company and can be used with the filling valve.
Precautions for the use of bending machine cylinders:
Before working, the hydraulic cylinder must perform several reciprocating movements with low pressure (greater than the starting pressure) to remove the gas in the cylinder before it can work normally.
In order to ensure the life of the hydraulic cylinder, it is recommended to use mineral-based hydraulic oil. The medium used must not be mixed with impurities and stolen goods to avoid scratching the inner wall of the cylinder and damaging the seals, causing internal and external leakage.
Model description
Tonnage/only
Model
Bore diameter
Rod diameter
Stroke