Causes of INVT inverter failures and methods to solve them

服务范围：

变频器维修

#Maintenance phone number: -#
INVT inverter D series maintenance# Voltage regulator tubes and other basic problems can be solved. Compared with the motherboard, it is easier to see obvious faults. By using the optical communication system, whether the electrolytic capacitor is leaking, etc., use a multimeter to measure the three phases. The result is: = The oscilloscope is mainly used to observe the electrolytic capacitors in various related circuits. The circuit should not be close to high-power heating components, digital spectrum analyzers, etc. Wuxi Anxu is the first choice for INVT inverter D series maintenance. Your choice is right. INVT inverter D series maintenance
Strong strength, superb technology, fast service, low fees, high repairs
Wuxi Anxu Technology and Trade
Co., Ltd. is
a company specializing in the maintenance, sales and sales of industrial automation products. The comprehensive service company has been repairing various industrial control products (frequency converters, servo drives, DC speed regulators, touch screens, soft starters, CNC system power modules) for several years. The overall repair rate is as high as
%
.
Step one: First ask the user about the fault phenomenon of the damaged parts and the on-site situation.
Step 2: Analyze the causes of such failures based on the user's fault description. If there is an on-site problem, call the customer to help solve the problem.
Step 3: Open the repaired parts and perform a comprehensive cleaning to confirm the damaged devices and analyze the feasibility of repair and restoration.
Step 4: Read and analyze the working principle of the circuit based on the working position of the damaged device to find out the cause of the damaged device to avoid similar failures next time.
Step 5: Contact the customer to discuss the replacement parts required for maintenance. Ask the user for maintenance opinions and then proceed with the repair after the customer confirms the quotation.
Step 6: The maintenance content includes eliminating known faults, replacing aging and damaged components, and thoroughly cleaning and maintaining the entire machine inside and outside.
Step 7: After repair, conduct a simulated load test on the components and send them back to the customer for on-site testing.