Super wear-resistant polyurethane floor

Super wear-resistant polyurethane is a newly developed economical polyurethane coating with high solid content, super wear resistance and low odor. It is an ideal topcoat with the following advantages: Abrasion resistance - this is one of the most important indicators of the service life of industrial floors. Especially for machining workshops and forklift walking areas, excellent wear resistance is required. Generally, the epoxy surface is operated with a conical grinder to test the weight loss. Low odor, high solid content polyurethane coating not only does not yellow and has good stain resistance, but also loses only .( ) in the same wear resistance test. Stain resistance - polyurethane has excellent stain resistance, it is easy to clean, resists oil stains, and resists chemical corrosion. All far exceed ordinary epoxy materials. In addition, some epoxy materials may turn white after continued contact with water because their curing agent components will chemically react with water. Chemical Resistance - Epoxies generally have good chemical resistance. In contrast, polyurethane performs better in this regard. Polyurethane in particular can withstand the attack of a range of chemicals, including: aliphatic and aromatic hydrocarbons, chlorine solvents, hydraulic fluids, aircraft fuels, acids, alkalis, alcohols, detergents, salts Motor oil and grease.
Hardness - Generally, we use pencil hardness to measure the hardness of polyurethane coating. Hold the pencil at an angle and scratch the surface of the coating to determine its surface hardness. For thicker epoxy coatings we use the Shore hardness test to measure the hardness. The higher the reading, the harder the coating. The hardness of ordinary epoxy coatings is one. According to the national floor coating test method, the hardness of our newly developed polyurethane is 1. Resistance - Polyurethane coatings are more resistant than epoxy coatings. In particular, our newly developed polyurethane has excellent resistance to UV discoloration. According to the relevant test results, when the two sample blocks are placed in the same environment for six months, the color change of the sample block is only visible to the naked eye/discoloration unit, while the discoloration unit of ordinary epoxy reaches the standard.
Contact person: Tian Fengqi
Contact number:
Contact address: New World International, Wuxi New District, Wuxi, Jiangsu, China