Chongqing invisible anti-theft net price invisible protection net

防盗网：

隐形防盗网

防护网：

隐形防护网

Chongqing Invisible Anti-theft Net Price Invisible Protection Net Advantages
Installation Hotline:
Chongqing Invisible Anti-theft Net Advantages
. Prevent accidental injuries caused by falling clothes and flower pots on the balcony
. Guarantee Children's safety prevents climbing accidents
. Alleviates psychological discomfort at high altitudes
. Makes full use of the effective space on the balcony
. Does not affect the line of sight and urban landscape decoration and protection.
. Complies with fire protection environment The requirements are especially applicable to some newly built residential buildings, villas, kindergartens, primary and secondary schools, Internet cafes, and other places
. When a fire occurs, it can be quickly dismantled in a few seconds to fully protect your personal safety. It is very convenient
. Miyuan can be invisible without the cagey feeling of traditional anti-theft nets. It's like putting an invisible protective sand coat on the balcony
Chongqing invisible anti-theft net price Chongqing invisible guard net construction introduction:
. The materials and tools that need to be prepared during construction are: aluminum alloy track steel wire expansion screws Wire interface willow nails, cross buckle, one-word buckle, alarm, wire positioning tensioner, etc.
. Before construction, measure the length and height of the balcony. Cut the length of the aluminum alloy material according to the length of the balcony. At the same time, calculate the construction area based on the height and length to calculate the length of the required steel wire.
. When installing the track, the lower track is generally installed first. It can be installed on the guardrail or on the floor. If the guardrail itself is a glass structure, it is recommended to install it on the floor. If the guardrail is made of iron, aluminum alloy, or stainless steel, it can be installed directly. Installed on the guardrail.
.If the track is installed directly on the guardrail, stainless steel screws are generally used. The length should be longer than one centimeter and the screw spacing should be controlled within one centimeter. If the track is installed on the floor, expansion screws are used. The track at the ceiling is fixed with expansion screws.
. Pull the steel wire and fix one end of the steel wire to the first screw on the track of the invisible protection net. Then the wire goes up to the first screw on the upper track. The wire goes around the second screw and then goes down to the second screw on the lower track. screws and so on until all the screws are surrounded.
.Use a wire positioning tensioner to tighten the steel wire. The general method is to pull the steel wire from beginning to end and then pull the steel wire one by one. After the invisible protective net is installed, it is necessary to ensure that the maximum distance between them is less than centimeters. .
. If the balcony is too high, you can pull a steel wire horizontally in the middle and then use a cross buckle to lock the horizontal and vertical steel wires to increase the safety of the invisible protective net. If the height exceeds the application height of the cross buckle, large aluminum strips need to be used to reinforce the invisible protective net.
.Alarm devices can be installed if necessary. Residents on low floors are recommended to install them.