Year1
- 厂家：
- 衡水德祥
- 规格：
- 300*8mm
- 型号：
- 651
Maoming swimming pool deformation joint waterproof rubber waterstop, middle buried type, very cost-effective, Maoming swimming pool deformation joint waterproof rubber waterstop, middle buried type, very cost-effective, Maoming swimming pool deformation joint waterproof rubber waterstop, middle buried A very cost-effective type of waterproof rubber waterstop with deformation joints in Maoming swimming pool is coming. A very cost-effective type of waterproof rubber waterstop with deformation joints in Maoming swimming pool is coming. A very cost-effective type of waterproof rubber waterstop with deformation joints of Maoming swimming pool is coming. A commonly used model of waterstop is the middle-embedded waterstop. There are protrusions on both sides of the central hole. Please see the figure for the specific type. The rubber waterstop is also the most commonly used middle-embedded waterstop in waterstop products. There are also types, types, etc. of water hoses.
Installation of rubber waterstop: During construction, the rubber waterstop is partially or completely buried in the concrete during the concrete pouring process. If there are many sharp stones and sharp steel bar heads in the concrete due to the tearing of the rubber, The cracking strength is - times lower than the tensile strength, so once it is punctured or torn, the crack will expand without a lot of external force. Therefore, during the positioning of the waterstop and the pouring of concrete, attention should be paid to the positioning method and pouring pressure to avoid The waterstop is punctured, so during the positioning of the waterstop and the pouring of concrete, attention should be paid to the positioning method and pouring pressure to avoid being punctured and affecting the waterproofing effect of the waterstop.
Specific precautions are as follows:
The rubber waterstop should not be exposed to the sun for a long time in the open air to prevent rain and should not come into contact with highly polluting chemicals. The product should be stored in a place that maintains a relative humidity of -℃-+℃ at %-%.
, Prevent damage to mechanical steel bars during product transportation and construction. During storage and transportation, the finished product should be kept straight and flat without any heavy pressure.
During the construction process, the product installation must be fixed to avoid displacement when pouring concrete and ensure the correct position of the waterstop in the concrete.
D. Usually our methods of fixing the waterstop include: using additional steel bars to fix special fixtures to fix lead wires and templates. If perforations are needed, they can only be installed in the edge installation area of the waterstop without damaging other parts.
When ordering, the user should calculate the length of the product based on the engineering structural design drawings. Special-shaped structures should have drawing instructions. Try to connect the waterstops into a whole in the factory. If it is necessary to connect on site, electric heating plates can be used for vulcanization and bonding or If the user has difficulty with the cold bonding (rubber waterstop) or welding (plastic waterstop) method, our company can send technicians to provide on-site guidance.
WhatsApp
