Jingjiang electric sliding door

颜色：

多色可选

尺寸：

根据实际门洞尺寸

透视：

可带小窗和小门

Contact: Manager Wang -: Jingjiang Electric Sliding Door
Electric sliding doors are generally welcomed by various companies in the current industrial door market and are one of the products for external doors. It is not only strong but also beautiful. The sliding door is suitable for doors that are not used too frequently and should not be opened in the morning and evening because of the thermal protection of the motor.
1. Jingjiang electric sliding door composition:
The electric sliding door consists of high pressure-resistant door panel + wear-resistant roller + double-sided guide rail + galvanized bearing torsion spring + drive motor system + positioning buffer specific The introduction below:
.High pressure-resistant door panel: The door panel is centimeters thick. The inner layer is thermal insulation polyester foam and the outer layer is a double-layer color steel plate. This door panel is made through roller coating and orange pattern embossing process. The finished sliding door can be used in cold storage at temperatures below minus ten degrees without any problems. The door panel is also frost-proof and anti-freeze.
.Wear-resistant roller: Made of galvanized steel plate and nylon material, it not only has strength protection but also has no squeaking sound when it rubs against the guide rail.
.Double-side guide rails: Made of galvanized steel plate customized according to the lifting method of the door before leaving the factory. It has high wear resistance
.Galvanized bearing torsion spring: The load-bearing capacity of the bearing and torsion spring is the pressure resistance of the entire door. The torsion spring with large load-bearing strength is the key to driving the door body to slide up and down. The torsion spring is made of galvanized steel plate.
. Drive motor system: The drive motor adopts a chain-type electric and manual automatic conversion device. Under normal electric conditions, the button operates normally and converts to manual opening when there is a power outage. It is opened upward through the chain and the handle at the bottom.
.Positioning buffer: Located at the end of the guide rail and auxiliary rail, it serves as a buffer for the door panel when it reaches the top, and also fixes the position of the door panel to prevent excessive movement.