Supply of medical doors/Anhui foot-operated medical door repair/Hefei card-operated medical door installation

The medical automatic door unit is composed of the following components:
. The lower guide system of the medical automatic door: it is the guide and positioning device for the lower part of the door leaf, which prevents the front and rear door body from swinging when the door leaf is running. When the door leaf is to be opened and closed once, the working process is as follows: When the medical automatic door sensor detector detects that someone has entered, it sends the pulse signal to the main controller. After judgment, the main controller notifies the motor to run, and at the same time monitors the number of motor revolutions. In order to notify the motor to increase power and enter slow operation at a certain time. After the motor receives a certain operating current, it runs forward and transmits the power to the synchronous belt. The synchronous belt then transmits the power to the spreader system to open the door leaf. After the door leaf is opened, the controller will make a judgment. If the medical automatic door needs to be closed, the motor will be notified. Make reverse movement to close the medical automatic door leaf.
.The door leaf traveling track of the medical automatic door: Just like the rails of the train, it constrains the spreader wheel system of the door leaf to make it travel in a specific direction
3. The power motor of the medical automatic door: provides door opening and The main force for closing the door controls the acceleration and deceleration of the door leaf
. The door leaf spreader wheel system of the medical automatic door: used to hang the movable door leaf, and at the same time drive the door leaf to run under power traction
. Medical automatic door Door sensor detector: The medical automatic door is responsible for collecting external signals, just like people's eyes. When a moving object enters its working range, it sends a pulse signal to the main controller
. Synchronization of medical automatic doors Belt (some manufacturers use triangle belt): used to transmit the power generated by the motor and pull the door leaf spreader wheel system.
. The main controller of the medical automatic door: It is the command center of the medical automatic door. Through a large-scale integrated block with an internal instruction program, it issues corresponding instructions to direct the motor or electric lock system to work. At the same time, people use the main controller to control the operation of the motor or electric lock system. The controller adjusts the door leaf opening speed, opening amplitude and other parameters
Summary: Medical automatic doors are mainly used in major hospitals and medical places. Medical automatic doors bring great convenience to hospitals and patients.