Anhui Runwen transformer door stainless steel transformer door Anhui Hefei 24-hour door-to-door service

Supply of steel lower louver door/distribution room door/full louver door/transformer room door/steel door for distribution substation specially supplied by Runwen Door Industry
Product description and features
Products are all Produced according to national standards, the frame material and fan material are filled with fireproof perlite. The surface treatment is electrostatic spraying or wood grain treatment, which is suitable for high-rise buildings, factories and office buildings, warehouses, and computer rooms.
Main technical performance: ventilation and heat dissipation, anti-theft and anti-drifting rain, the louvers are lined with stainless steel insect-proof nets. The decorative surface is made of electrostatic powder spraying, which is beautiful, strong and durable. Various colors are available, and the lock can be a handle lock or a padlock.
, Scope of application
Suitable for independent or attached, closed or open outdoor doors and windows of transformers in industrial and civil buildings. There are two types of enclosed transformer rooms: high-type and low-type. When the low-type transformer cannot meet the ventilation requirements, a high-type transformer room should be used.
, door type and window type number
Door opening size The door opening of the enclosed transformer room has three types: width, height, and height. Combined into six hole sizes. The open transformer room has three door opening widths: , , and , and the door leaf heights are .
, material production and installation
. The performance of steel plates and shaped steel should be no less than that of steel, and the welding rod should be made of type. The color steel plates are produced and assembled using riveting or glue bonding, and electric welding is not allowed.
. Except where noted, welds are all joint welded, and there shall be no welding defects such as unmelted, unwelded, pores, cracks, and burn-through.
. Allowable dimensional error of door leaf frame
Name of large door leaf and small door leaf
The length and width of the frame per meter
The diagonal line of the frame per meter.
The plane twist of the frame The warping should not be greater than . Not greater than
. The position of the hardware on the door leaf should be accurate. Except as noted on the drawing, the selection and welding procedures of the door leaf hardware can be customized on site.
. Except for color steel plates, other materials need to be treated with anti-rust and finishing paint.
. The geometric dimensions of door and window sashes should be checked before installation and should not exceed the allowable error.
. During installation, the door leaf should be erected in the hole, and each part should be adjusted to the required size. The door leaf should remain vertical. Preliminarily spot weld the upper and lower door shafts to the reserved parts of the opening door and door leaf sills. Ensure that the upper and lower door shafts are on the same vertical line. After repeated test runs, weld the door shafts firmly and wait until the welding is fixed in place. Then carry out the plastering project of the door. The products are all produced in accordance with national standards, and the frame material and fan material are filled with fireproof perlite. The surface treatment is electrostatic spraying or wood grain treatment, which is suitable for computer rooms and power distribution rooms in high-rise buildings, factories, office buildings, and warehouses. The main technical performance is ventilation and heat dissipation, anti-theft and anti-drifting rain, and the louvers are lined with stainless steel insect-proof nets. The decorative surface is made of electrostatic powder spraying, which is beautiful, strong and durable. Various colors are available, and the lock can be a handle lock or a padlock.