Three-beam and four-column hydraulic press factory direct sales

-Four-column and three-plate hot press machine
1. Scope of application:
This series of hydraulic presses are widely used in various membrane switches, membrane panels, convex bumps, etc., plastic material embossing and other products that need to be heated and formed. It is suitable for the majority of electronics Commonly used equipment in the plastic industry
2. Product features:
. This series of hydraulic machine tools uses - high liquid pressure as the power source and is connected to an external three-phase or three-phase AC power supply
. This series of equipment uses liquid It acts as a medium to transfer energy with high efficiency and the pressure holding time can be adjusted freely within a small period
. The noise of the equipment does not exceed decibels when it is in standby mode
. The upper and lower working surfaces are equipped with heat-treated heating plates and are fixed with universal grooves. The mold is controlled by intelligent temperature controller D. The precision is high and the temperature error is within ℃
. The vertical accuracy of the movable plate using a four-column and three-plate structure is controlled by four precision guide bushes. The parallel accuracy of any point on the lower working surface and the upper working surface reaches .Below
.Adopts adjustable positioning cylinder bottom dead center positioning accuracy and high repeatability. It can reach .below .% to ensure the imprinting depth
.It has automatic counting function and has two control modes: manual and semi-automatic. Manually can press When the mold is installed and stopped within any travel range, it is equipped with an emergency recovery button and can also be equipped with an infrared hand guard.
.Customers can adjust the pressure, pressing stroke, pressure holding time, and closing height to facilitate operation.