Year1
- 长*宽*高：
- 2980*1710*2600mm
- 齿形：
- 第三代α型非对称5-6齿形
- 净重：
- 510kg
d: Sales manager: Tang Yan - Online:
1. Main component features of Denair dry-type oil-free air compressor:
/> .Controller
In order to make the operation of the unit simple and convenient and the functions more complete, the unit adopts a controller specially developed for oil-free machines. The touch screen control display can display various operating parameters (including pressure and temperature) on the display. Optional) pressure real-time curve, current real-time curve and other various data) display alarms and fault shutdown reasons to guide operators in maintenance, and have complete self-diagnosis, alarm, and monitoring functions to memory and save the cause and location of faults. In addition, according to user needs Different control methods such as local/remote/interlocking can also be configured.
d= _r dd:
.Fan
Denair dry screw air compressor adopts the latest centrifugal fan for cooling air volume, large noise, low air pressure, stable and uniform air pressure, so that the cooling area of the cooler can be fully utilized. Completely overcome the problem of poor performance of large coolers in air-cooled air compressors and significantly reduce air compressor noise to create a quiet environment for customers.
d= _r d:
.Cooler Denair dry screw air compressor water cooler adopts a new type of plum blossom inner fin tube and shell heat exchanger, and the cooling water in the compressed air pipe is discharged from the shell The side tube nest is a new type of plum-shaped copper tube. Compared with conventional water-cooled heat exchangers, the advantages are as follows:
The compressed air tube path has a higher pressure bearing capacity than the outer fin tube
The cooling water tube path has a relatively high pressure bearing capacity. The process in the tube is chosen to allow the cooling water to pass through multiple sets of baffles to increase the degree of turbulence and reduce the probability of dirt adhering to the tube wall. It prolongs the equipment cleaning cycle and reduces the user's maintenance costs
The gas flows through the tube and the fins are along the axis in the tube. The pressure drop generated by the unit windward area is lower than that of the outer fin when it extends horizontally relative to the outer fin. It is safe and reliable to use and the fin is not easy to fall off
The installation of the heat exchanger is simple and the same as that of a conventional shell and tube heat exchanger
/> The shell side is made of stainless steel sheet material to prevent corrosion and rust of the cooler due to high temperature and high pressure, which affects the life of the compressor host and air quality.
The tube nest can be disassembled independently to facilitate user maintenance.
The compressed air pipe side and the water pipe side reduce the noise generated by the compressed air.
d= _r dd:
D. Air-water separator
Denair dry-type oil-free compressor’s secondary air inlet and rear cooler air outlet adopt cyclone air-water separator The air-water separator at the inlet of the secondary host of the separator can effectively eliminate the condensed water generated due to cooling from entering the secondary host, effectively preventing the coating of the secondary host from falling off due to water ingress, and cooling the secondary host after it is rusted. The water separator of the machine can effectively remove the condensed water from the aftercooler, greatly reducing the condensed water entering the gas storage tank. It does not require the user to remove the water from the gas storage tank every day, reducing the user's maintenance costs.
The advantages of the cyclone gas-water separator are as follows:
The aluminum die-cast shell is anti-corrosion and has no secondary pollution
The careful design of the static rotor blades maintains efficient gas-water separation
Low pressure loss, the pressure difference is less than 1. Effectively prevent unnecessary power loss due to excessive pressure difference.
d= _r d:
Automatic drain valve
Denair dry oil-free compressor adopts mechanical automatic drain valve. The drainer is made of high-grade aluminum alloy material and is die-cast with strong tightness and surface spraying. The plastic curing product has good resistance and is easy to install. It makes no noise and is easy to clean. No compressed air loss. This drainer does not require power consumption. It is safe, low-carbon and environmentally friendly, and can truly save costs for customers. .Oil Pump
Some frequency conversion models of Denair dry-type oil-free screw machines use imported Japanese internal rotor cycloidal oil pumps. Its characteristics such as stable output pressure, low noise and low vibration provide the most suitable environment for the smooth operation of the main engine.
d= _r dd:
Air inlet
Through a series of special designs, this unit is particularly suitable for the high temperature and high humidity working environment in Asia. The unit can operate continuously in high temperature environments such as the main unit suctions alone. Everyone knows that the temperature difference between the inside and outside of the unit cover is about ℃. If the machine sucks air directly from the cover, the inhaled air will be higher than the ambient temperature. In this way, the temperature of the entire machine will rise. In summer, high temperatures often occur.
d= _r dd:
Intake valve
The intake valve is generally hydraulically controlled. When pressurized hydraulic oil enters the control cylinder, the piston of the control cylinder overcomes the spring force and causes the intake valve to open. The plate opens and the dump valve closes at the same time. The unit enters loading mode. When the hydraulic oil loses pressure, the spring in the cylinder is controlled to return the piston to its original position. The intake valve valve plate closes and the dump valve opens. The unit enters unloading mode.
d= _r dd= _r dd d= _r dd d= _r dd:
_
_ d
2. Development History of Denair Company
Headquartered in The German Denair Group in Cologne, Westphalia, Germany is one of the top 100 German machinery companies. It has been committed to the R&D and production of gas compressors since it developed the first refrigerant compressor unit. It is a famous German brand in the field of gas compression< br/> The European R&D center located in Cologne has the world's most accurate three-coordinate measuring instrument, special machine tools and special grinders to ensure continuous breakthroughs in the research and development of core technologies
The Denair Group was established in Shanghai The representative office began to sell original Denair twin-screw compressors in the Chinese market and received unanimous praise
In 2008, Denair Group was registered and established Shanghai Denair Compression Machinery Co., Ltd., and established a R&D center, pilot factory and complete machine in Jiading, Shanghai. The warehouse began to introduce Denair Group's technology and conduct research and development and large-scale production of Denair series products according to China's working conditions, and has an annual production capacity of 10,000 sets of complete machines.
Energy saving comes first and value sharing. Denair Compressor is willing to truly become your most considerate friend.
3. Denair's quality assurance and after-sales service commitment
Quality commitment:
● Use Shanghai Denair Compression Machinery Co., Ltd. original accessories and maintenance plans for lifelong maintenance.
● During normal operation, our company will visit the machine regularly on a monthly and quarterly basis.
● The air compressor has a one-year warranty.
● The air compressor host screw has a one-year warranty.
Our company promises that upon receiving a notification of user equipment failure, the office where the equipment is located will immediately respond by phone and arrive at the site within hours for processing. If the office is unable to handle the problem on site, the Shanghai head office will directly send after-sales engineers to the site within hours for processing. To ensure long-term stable operation of the equipment.
d: 4. Our contact information
Address: Room, Dongchuang Technology Park, No. Jinfeng Road, Mudu Town, Wuzhong District, Suzhou City
Telephone:
Fax:
Email:@.
>
WhatsApp
