Supply Put PT131 pressure transmitter Beijing pressure transmitter

Pressure transmitter Beijing pressure transmitter Pressure transmitter manufacturer Pressure transmitter price Pressure transmitter content introduction:
The pressure transmitter produced by Beijing Pute Instrument Complete Factory <# => is a A pressure transmitter with precisely adjustable zero and full-scale outputs. They can use diffused silicon sensors with stainless steel isolation diaphragms or dry ceramic capacitive sensors or ceramic piezoresistive sensors. -The rod-shaped pressure transmitter can be directly installed on the flange interface of the pressure pipe to be measured. To facilitate installation and debugging, a stop valve should be installed between the flange interface and the pipe. The influence of the installation position on the zero point can be adjusted. The measured medium should be compatible with the structural material of the transmitter.
Features of ceramic capacitive sensors:
Ceramic capacitive sensors adopt the most advanced electronic ceramic technology, dry pressure measurement technology without intermediary liquid, thick film electronic technology and signal transmission technology. Its main technical features are as follows:
◆Strong overload and impact resistance. The overvoltage can reach a hundred times the measuring range. Even if the measuring element is directly hit with a hard object, it will not be damaged and has no impact on the measurement accuracy.
◆High stability, better than .% of full scale per year. This technical index has reached the level of intelligent pressure instruments.
◆Strong output signal and good anti-interference ability.
◆The temperature drift of the sensor without intermediary liquid is only .%/.
◆The linearity is good up to level.
◆It is not affected by the installation direction and has no industrial pollution.
◆The ceramic measurement interface has good corrosion resistance.
◆Can measure positive and negative gauge pressure and absolute pressure.