Dräger X-am7000 (five-in-one) gas detector

dDräger - can continuously test up to a variety of gases at the same time. Different combinations of sensors provide flexible solutions for your inspection tasks. This instrument can be configured with an electrochemical sensor and two catalytic combustion sensors or infrared sensors.
dIt has the following characteristics:
Flexible and diverse sensors
Dräger's various sensors can detect a variety of gases and vapors. For some sensors, the gas to be measured can be selected from the gas list in the menu without recalibration. This design can increase the types of gases to be measured and improve measurement accuracy. Dräger sensors are known for their fast response time, small cross-sensitivity, high accuracy and long life.
Rugged and waterproof
Dräger - Built-in waterproof and dustproof protective film with a protection level that allows it to be submerged in water for a short time without any damage. In addition, there is a specially designed leather case to protect it from damage even if it falls from a height of 3.5 meters.
Intelligent plug-and-play sensors
The instrument can automatically identify each sensor. All sensors are pre-calibrated and can be reconfigured simply by replacing the sensor. No additional maintenance or service is required.
Leak detection function
Dräger - can complete the leak detection function. A new flexible gooseneck probe can be used to detect leaks in flange overhauls and valves. In tracking mode, the instrument emits a chirp that increases or decreases based on detected changes in gas concentration.
Intuitive software functions
Dräger-the software has a user-friendly interface and is easy to operate. Operators only need basic training to master its powerful functions, such as quickly viewing or opening sum values and peak record saving functions.
Long service life
The newly designed rechargeable battery with built-in intelligent charging management module can ensure that the instrument can run normally for several hours (the time depends on the battery model). Alkaline battery compartment also available. Dräger – Configurable Dräger sensors with a lifespan of up to 10 years. If changes need to be made to configure the instrument this can be done in simple steps.
Multiple alarm methods
Users cannot ignore the alarm sound, the alarm volume is large, and the light alarm is visible. Dräger - will emit a life signal every second to indicate that all functions of the instrument are normal.
Data Management
The built-in data storage can store groups of data - for example, a group of data recorded every minute can store hours. The data can be transferred to the computer through the infrared interface and software and statistics can be made.
Quickly view information
The large character display and alarm auto-focus function make the displayed data and signs easy to identify, allowing you to immediately determine whether the working environment is dangerous. All information has simple text prompts.
Powerful built-in pump
Powerful built-in pump with a sampling distance of meters. The instrument can continuously monitor the working condition of the pump and will sound an alarm when the pump flow rate is low.
dTechnical parameters
Dimensions (length, width and height):
Weight:
Instrument: grams
Rechargeable battery: grams (.) grams (.)
Environmental conditions:
Temperature: -~+℃
Pressure:~
Humidity: ~%
Protection level:
Battery working time:
Alkaline battery Hours
Ni-MH battery (./.) hours
Alkaline battery (./.) hours
Audible alarm d within distance
Charging time: .~hours according to battery model It depends
Pumping mode: The maximum length of the extension tube is meters
d certification
- +℃
:
(Application pending):
-r: ( )
d Provided with the machine
Host (including sensor) charging unit manual
d Optional accessories
Genuine leather carrying bag pump adapter alkaline battery compartment charging unit car charging adapter Retractable detector gun, leak detection gun, float ball probe, water and dust filter - assembly.
d