BOD5 supporting biochemical incubator

dd Product Description
d1. Product Introduction:
The structure of the digital display biochemical incubator is made of imported stainless steel, the hollow glass insulation material is polyurethane foam, which has good insulation, light weight, and beautiful overall appearance. The control system adopts Microcomputer control, digital display, accurate and intuitive, high precision, convenient and reliable temperature adjustment, easy to observe with illumination. The light in the light incubator can be strong or weak. The constant temperature and humidity incubator can also have constant humidity. The refrigeration system is a high-quality fully enclosed compressor with large cooling capacity and low noise. The box is equipped with a high-quality fan device to force air convection and make the temperature distribution more uniform.
Digital biochemical incubators are widely used for the culture and preservation of bacteria, molds, microorganisms, and tissue cells, as well as water quality analysis and D testing, and are suitable for breeding experiments and plant cultivation. It is an important test equipment for scientific research institutions, colleges and universities, production units or department laboratories in biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry.
2. Main technical parameters:
●Volume:
●Temperature control range: ℃～℃
●Temperature fluctuation: .℃
●Temperature uniformity:. ℃
●Heating power: ~
●Compressor power: ~
●Compressor delay protection time
●Noise:
●Working mode: continuous operation
/> ●Working environment: No corrosive gases below temperature ~℃, humidity %r
●Power supply:
Intelligent digital display biochemical incubator model list:
d -- d -: Main models
- :Volume
- :Dimensions
- :Temperature control range
- :Temperature uniformity
- :Heating power
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :< br/> - :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
- :
- :
- :
- :～℃
- :℃
- :
- :
d
3. Instructions for use:
Turn on the power and close the power switch. The power indicator light in the power switch of the whole machine will light up.
For temperature control settings, please refer to the manual of the intelligent digital temperature controller.
If lighting is needed, turn on the lighting switch.
This incubator has a breakpoint protection function and a delay function of about one and a half minutes. After the compressor stops, it takes about one and a half minutes to start again.
4. Maintenance and cultivation:
The shell of the incubator should be reliably grounded.
The incubator should be placed in a cool, dry, well-ventilated place, away from heat sources and sunlight. Place it stably to prevent vibration and noise.
In order to ensure that the condenser can effectively dissipate heat, the distance between the condenser and the wall should be greater than 1. There should be clearance on the sides of the box and at least space on the top of the box.
When transporting, repairing, and maintaining the incubator, avoid collision, shaking, and vibration. The maximum inclination is less than 10 degrees.
If the instrument suddenly stops working, please check whether the fuse tube (behind the box) is burned out and check the power supply.
When the incubator is working for refrigeration, it is not advisable to make the difference between the temperature inside the incubator and the ambient temperature exceed 0 degrees.