DS-800 organic glass water collector

dd Product Description
d 1. Main uses
Field water sampling is specially used for collecting water samples within the depth of surface water such as rivers, lakes and reservoirs.
2. Technical Parameters
Water bottle body: Made of plexiglass with lead weights, the upper and lower lids can be easily flipped to open and close
Capacity:
Sampling depth:
Thermometer: Temperature measurement error ℃
Plexiglas water collector: It consists of a barrel, two semicircular upper covers with shafts, and a movable bottom plate. It is used to collect seawater samples at sea.
3. Application fields
Mainly used for the collection of aquatic biological samples. It is also suitable for the collection of water quality samples other than bacterial indicators and oil. Phytoplankton sampling can use organic glass water collectors. (Note: When using, be sure to clamp the water outlet rubber tube first and then open the two semicircular upper covers. Let the water collector sink into the water and the bottom water inlet will automatically open. Water samples at different depths can be collected with a rope attached to it. The water samples collected when the water inlet from below and the water outlet from above stop at different depths are the water samples of this level. The sinking depth should be marked on the tether. When it sinks to the required depth, lift the upper cover of the tether. and the lower water inlet automatically closes after raising the water surface. Do not touch the lower bottom to avoid water sample leakage. Stretch the rubber tube of the water outlet into the container mouth and loosen the iron clamp. The water sample is injected into the container.) Quantitative samples are collected in still water and slow-flowing water bodies. Collect using organic glass sampler.