Liuzhou Epoxy Floor Parking Lot Cost Consultation

The special epoxy resin mortar floor paint for parking lots is seamless, dustproof, wear-resistant and anti-slip, acid and alkali resistant, easy to clean, easy to maintain, bright in appearance, diverse in color, simple to construct, and cost-effective. One-time construction can reach up to Dust-proof, wear-resistant, waterproof, fire-proof and other properties. The construction thickness can be optional. Generally, it can meet the service requirements and the service life is within - years. , Base surface treatment: polish and clean the base surface, which must be dry, smooth and without hollows
, Apply primer: seal the base surface to enhance adhesion
, Scratch mortar mid-coat: increase the pressure resistance of the ground
/>, scraping putty: sealing the mortar layer to make the mortar layer smooth without hollowing
, roller brushing epoxy topcoat, spraying topcoat or anti-slip surface layer.
1) The strength of concrete must contain/or above ordinary silicates. . Cement and water-cement ratio.
(2) The leveling layer must be fine stone concrete and its thickness must not be less than 10%.
Product requirements for the cement base surface
The cement base surface is firm, solid, and does not allow for shelling. It is best to pour the concrete layer together with the mortar leveling layer to prevent the phenomenon of mortar shelling. If the concrete layer is pounded first, a mortar layer is required. If the thickness is not less than that of the forklift, it is required to be thicker.
. The surface is required to be sand-free and hard, without cement powdering. requirements, high quality cement. , The newly poured cement mortar layer must be fully maintained
. The cement base surface is flat and free of unevenness, honeycomb pitting, and cement lumps.
. It is required that the flatness of the ground should not be greater than the required thickness of the coating (use a meter ruler to lean against it flatly)
. The dry moisture content of the surface should be less than 1. Keep the ground dry and free of oil stains. Remember that after the maintenance period of the cement floor, no water should be used the day before entering the site for construction. Rinse or mop the floor
. The value of the floor surface should be at.~
. The ground should be free of oil stains, other paints, latex paint, bubble gum and other residues
The slope should meet the design requirements. The allowable deviation value is % of the slope and not greater than
It is suitable for various ground and underground parking lots such as factories, schools, hotels, office buildings, residential quarters, shopping malls and buildings. As well as parking lots, ramps, road bridges, sidewalks, swimming poolside, auto repair yards, garages, food factories, large underground parking lots and other surfaces.
-