Nanning China South City parking lot floor renovation project

For flat floors, ordinary parking lot epoxy floor paint can be used. For floors with poor flatness and surface strength, ~㎜ parking lot epoxy floor paint can be used. For advanced requirements, ~㎜ ring parking lot epoxy floor can be used. Floor paint colors can be designed into gray, blue, green, etc. Vehicle passage
Due to frequent vehicle traffic, the design should be strengthened relative to the parking area. You can use ~㎜ parking lot epoxy floor paint or ~㎜ parking lot epoxy floor paint. The color is usually green. The width of the passage is set according to the site conditions. Generally, the two-way carriageway should not be less than meters, the one-way carriageway should not be less than meters, and the pedestrian passage should be meters. Yellow marking lines are drawn on both sides of the passage, and the line width is ~mm.
Traffic signs
Yellow or white sign paint can be used in the passage, and luminous marking paint can be used to draw arrows to indicate the direction of traffic and point to various parking areas, such as parking areas, parking areas, etc.
Parking space setting
Set parking spaces according to the structure of the parking lot ground area. Cars can usually be designed to be ~ meters wide and long. The parking spaces are drawn with yellow or white marking lines, and the marking lines are ~ mm wide.
Column surface treatment
In order to increase the conspicuity of the parking lot column and avoid hitting the column when reversing, the lower end of the column can be marked with yellow and white diagonal zebra crossings.
Anti-slip floor for vehicle entrance and exit ramps
Vehicle entrances and exits must have an anti-skid effect. Some parking lots have already taken this into consideration during civil construction and will construct it into a corrugated uneven ground. In this case, only a part of it is needed Paint the traffic lane color part with another color, just alternate the two colors.
National toll-free hotline