Year1
- 规格：
- 6000长×240宽×30厚度（mm）
- 遥控器有效遥控距离：
- ≤150m（空旷地带）
- 承 重：
- 20T
1. Overview The portable remote-controlled roadblock is made of a combination of high-performance reinforced plastic blocks and stainless steel deflation hollow needles. It adopts an electromechanical integrated remote control device. It is easy to operate, safe and reliable. It can be set up at any time for mobile defense. It is an indispensable advanced equipment for public security, armed police, public security and other law enforcement departments when they need to set up cards to intercept suspect vehicles.
2. How to use
Before use, ensure that the battery in the remote control box is charged for enough time to keep the voltage of the power supply between -.
. On the road section where the interception task is required, open the right side lid of the roadblock packaging box, roll out the roadblock roll, take off the elastic hook used to fix the roadblock, lean against the side of the roadside, and roll towards the road surface where the vehicle is to be intercepted.
. Connect the wiring between the remote control box and the roadblock head. Insert one end of the two-meter three-core connecting cable into the roadblock head connection jack and the other end into the remote control box roadblock output connection jack.
. Open the upper cover of the remote control box and pull the power switch to the built-in power supply. The power indicator light is on. The device enters the working state. Pull out the left receiving antenna and raise it up to increase the receiving distance.
When you need to perform the task of intercepting the suspect's vehicle, press and hold the remote control button. The power box will make a beeping sound. The interception indicator light on the power box will light up. The stainless steel hollow needle in the roadblock will automatically stand up. At this time, if you forcefully pass through the roadblock, the wheels will be stabbed. If a few stainless steel punctured hollow needles are inserted into the tire, the tire will deflate immediately within two seconds and the tire will be unable to continue driving and will have to stop.
After the interception mission is completed, release the remote control button and the erect stainless steel hollow needle will rotate back to its original position and enter the standby state.
. Recycling of remote-controlled vehicle blocking roadblocks. Roll the roadblock block into a round shape and use elastic hook straps to secure the roadblock block. Turn off the power switch of the remote control box and place the remote control box into the empty space in the middle of the roadblock block. Hold the roadblock box body with your left hand and your right hand. Roll the roadblock block into the box, put in the connecting cable, and fasten the box cover.
This remote control roadblock is also equipped with an external power connection cable. When the power supply voltage in the remote control box is insufficient and cannot work normally, one end of the car connection cable can be inserted into the external power connection jack of the remote control box and the other end can be inserted into the car cigarette lighter. Pull the power switch of the remote control box to the external power supply position. The operation is the same as the above.
. The charging power box is equipped with a voltmeter to show that when the power supply undervoltage is lower than . When charging, plug one end of the charging power cord into the mains and the other end into the AC input jack of the power box. The charging indicator light will light up. Normal charging time - hours.
3. Main technical indicators
Effective length, width and thickness of the roadblock
Working voltage:
Effective remote control distance of the remote control: (open area)
Remote control speed: times/second
Deflated hollow steel needle:
Weight:
Packing box volume:
Load bearing:
4. Precautions
It is strictly forbidden to use hands and feet when using Kick or step on the barricade blocks to avoid damaging the barricade or causing the operator to be stabbed by the erected stainless steel hollow needles.
After each task is completed, the shortage of stainless steel hollow needles or other parts should be promptly replaced.
Please do not disassemble the connecting parts of the equipment at will. If repair or adjustment is needed, please contact the supplier or manufacturer.
Generally, please do not use this remote-controlled roadblock with waterproof function in rain, snow or muddy environment for a long time.
When not in use for a long time, the power box should be charged once a month to extend the battery life and avoid damaging the battery.
5. Accessories
Serial number
Accessory name
Remarks
Remote control box
Set
Control Connecting cable
Root
Car connecting cable
Root
Deflated hollow needle
Root (with rubber sleeve)
< br/> Charging cable
Root
Pin installation tool
Individual
Instructions
Copies
Warning: This product is only Only for use by law enforcement officers when enforcing the law!
WhatsApp
