Year1
- 导热系数：
- 0.028W/(m.K)
- 抗压：
- 150kpa
- 规格：
- 120cm*60cm
. Juntao Weiye Insulation Board is a material that is continuously extruded and foamed through a special process. The hard film formed on the surface is even and flat, and the interior is completely closed-cell foamed continuously and evenly. The honeycomb structure therefore has the characteristics of high pressure resistance, lightweight, non-absorbent, non-breathable, wear-resistant and non-degradable. Compared with polystyrene foam boards, its strength, thermal insulation, resistance to water vapor penetration and other properties are greatly improved. It can still completely maintain its thermal insulation performance and compressive strength under water immersion conditions, and is especially suitable for thermal insulation and moisture-proof treatment of buildings. It is one of the most affordable and high-quality construction materials in today's construction industry.
. Unparalleled thermal insulation performance
. The thermal conductivity of Juntao Weiye insulation board is less than or equal to ./ far lower than other insulation materials, so it has the characteristics of high thermal resistance and low linear expansion rate. It is widely used in roof insulation systems, cold storage, and wall insulation for unparalleled thermal insulation effect.
. Water absorption that is absolutely impossible
. As a perfect thermal insulation material, water absorption is an extremely important technical indicator. High water absorption will lead to poor thermal insulation performance. Juntao Weiye insulation board has There are no gaps on both the front and back sides of the complete closed-cell structure board, making it impossible for moisture to penetrate due to water leakage, condensation and freeze/thaw cycles. Therefore, it can effectively prevent the entry of water molecules and prevent the board from aging. Over time, the board will be insulated. The layer will lose its function, further causing the insulation structural layer to need to be renovated. The closed-cell structure of the board can effectively prevent the penetration of water molecules (including water vapor). Even if it is mechanically damaged during construction, the insulation board can effectively maintain low water absorption due to its tight honeycomb structure. Because it effectively prevents the penetration of water molecules and is non-hydrophilic, aging is almost impossible to occur and almost lasts as long as the building.
.Excellent and long-lasting thermal insulation performance
.Low thermal conductivity is a requirement for all thermal insulation materials. The board is made of polystyrene. It is well known that polystyrene itself is an excellent thermal insulation material. In addition, the tight closed-cell honeycomb condenser produced by extrusion can more effectively prevent heat conduction.
.Unexpected compression resistance
.The insulation board is a lightweight and high-strength board. The compressive strength can be as high as above when the density does not exceed per cubic meter. Good impact resistance can be achieved by using it in buildings.
.The excellent compression resistance of the insulation board is almost unchanged even if it is soaked in water. This feature is not found in other insulation materials.
.Good flame retardant
.Provide ordinary and flame retardant products according to user requirements, which can fully meet the requirements for flame retardant performance of thermal insulation products in factories, factories, stadiums, convention and exhibition centers, etc.
. High-quality environmentally friendly products
. The chemical properties of Juntao Weiye insulation board are stable, no harmful substances volatilize, will not decompose or mildew, and have good corrosion resistance.
.In the production process of Juntao Weiye insulation boards, environmentally friendly raw materials are used and no harmful gases are produced. The production process also embodies the concept of environmental protection. The solid waste generated can be recycled and used as a recyclable environmentally friendly product.
. Convenient construction and low cost
. Due to its light weight, it is easy to transport and easy to cut. No need for an electric saw. Simple fixation. Only iron sheets and iron wires can be fixed with plastic adhesive polymer mortar, so it can be used for construction. The cost is greatly reduced.
Insulation board_
WhatsApp
