Beijing ordinary foam board manufacturer

导热系数：

0.040W/(m.K)

抗压：

100kpa

规格：

120cm*60cm

Poly
Ethylene foam board - also known as foam board, the board is a white object made of expandable polyethylene beads containing volatile liquid foaming agent, pre-expanded by heating and then heated and formed in a mold. It has the structural characteristics of fine closed cells and is mainly used for building walls, roof insulation
.Poly
composite board insulation, cold storage, air conditioning, vehicle, ship insulation, floor heating, decoration and engraving, etc. Very versatile.
.
Advantages of thermal insulation
.Protect the main structure of the building and extend the life of the building. Since external insulation places the insulation layer outside the structure, it reduces the pressure caused by structural deformation due to temperature changes and reduces the erosion of the structure by harmful substances in the air and ultraviolet rays.
.Effectively eliminate thermal bridges. In the past, internal insulation was used, and thermal bridges were unavoidable. However, external wall insulation can effectively prevent the occurrence of thermal bridges and avoid condensation.
.To improve the moisture content of the wall. Generally, a vapor barrier is required for internal insulation. However, the temperature permeability of external insulation materials is much stronger than that of the main structure, and condensation generally does not occur inside the wall. , the temperature of the entire wall at the structural layer is increased, further enhancing the thermal insulation performance of the wall.
. It is beneficial to maintain a stable room temperature. External wall insulation is used. Since the structural layer with a large heat storage capacity of the wall is on the inside of the wall, it is beneficial to maintain a stable room temperature.
.Increase the usable area of the house. It can avoid damage to the insulation layer during secondary decoration.
Parameter indicators
Explanation of actual measured values required by project unit standards
Appearance quality/Execution standards. Requirements to meet standard requirements and pass
Allowed size deviations/Execution standards. Requirements to meet standard requirements and pass
/> Apparent density/ . . Passed
Compression strength qualified
Thermal conductivity/ (.) . . Passed
Dimensional stability
Water vapor transmission coefficient/ Passed
Water absorption grid
Negative fracture and bending qualified
Bending change/ /
Oxygen index grid
Combustion grade up to grade compliance
Common specifications
Each Cubic meter weight (kg) Dimensions (length and width) Thickness
,
,
,
,
,
&&
,
Other specifications of plates can be customized according to needs.
. .Company name: Beijing insulation board material manufacturer
Company address: Beijing. Liangxiang, Fangshan District
Company phone number:
Company fax:
Contact person: Mr. Zhu Haigang (Manager)
Contact number: