PVC cable material granulator

Cable material granulator
. -#--->Features and molding characteristics
r :#--d >
. -#-r --->Specific gravity:
.r :# --->
. -# --->g
r :#--d >/
. -# --->cubic centimeter molding Shrinkage:
r :#--d >.-.%
. -# --->Molding temperature:
r :#--d >
. -# --->℃.
r :#--d >
. -#-r --->Features: Excellent mechanical properties, excellent electrical properties, strong acid and alkali resistance, good chemical stability but low softening point
r :#--d >.
. -# --->Suitable for making thin plate wire and cable insulation seals, etc.
r :#--d >
. -#-r --->Molding characteristics:
.r :# --->
. -#-r -- ->． Amorphous materials have low moisture absorption and poor fluidity
r :#--d >
. -# --->In order to improve fluidity and prevent bubbles, plastics can be pre-dried
r :#--d >
. -# --->The mold pouring system should be thick and short, the gate cross-section should be large and there should be no dead corners
r :#--d >
. -# --->The mold must be Cooling surface chrome plating
r :#--d >
. -# --->． Due to its corrosive and fluid characteristics it is best to use special equipment and molds. All products must be added with different types and quantities of additives as needed
r :#--d >
. -# --->． Easily decomposes with steel
r :#--d >
. -# ---> at temperatures
r :#--d >
. -# - -->Copper is more susceptible to decomposition and corrosion when in contact
r :#--d >
. -# --->Irritating gases
r :#--d >
. -# --->Small molding temperature range
r :#--d >
. -# --->． When using a screw injection machine nozzle, the hole diameter should be large to prevent material stagnation in dead corners
r :#--d >
. -# --->It is best not to have inserts. If there are inserts, they should be preheated.
r :#--d >
. -# --->(polyvinyl chloride) is a material with good flame retardant chemical stability and only produces low tensile cracking internal force. At the same time, its material properties also include high strength, high stiffness and high hardness. The operating temperature range is from below zero
r :#--d >
. -# ---> to
r :#- -d >
. -# --->It can be bonded and welded.
r :#--d >
. -# --->Main features: Strong corrosion resistance: most suitable for corrosion-resistant equipment in the chemical industry. Easy processing: cutting, welding, and bending are all extremely simple. High strength, high stiffness and high hardness, good electrical insulation, good chemical stability, self-extinguishing, low water absorption, easy to bond and easy to paint. Low price.
r :#--d >
. -# --->Application fields: Acid test manufacturing tower, seawater concentration tank, photo developing equipment, electroplating tank, battery box, meter panel, audio base, upper cover, radio bottom plate, various electrical Insulation boards, cement tank linings, windshields, exhaust air ducts, engineering stationery, building materials, etc.