Shanghai micro electric hoist | construction site micro electric hoist | simple structure

Shanghai micro electric hoist | Micro electric hoist for construction sites | Simple structure
Precautions for installation of Shanghai micro electric hoist
Open the box. Be sure to lift off the tape wrapped around the wire rope of the rope drum and take it off before testing the machine. If you test the machine in a hurry, the wire rope may rewind and damage the limit frame.
Direct contact between the wire rope and the limit frame should be avoided, otherwise the limit switch will malfunction and the Shanghai miniature electric hoist will not work properly.
. Do not let the Shanghai miniature electric hoist be exposed to rain or soaked in water. The protection level of the miniature electric hoist is.
When using the Shanghai mini electric hoist, the body cannot move or rotate along the mounting rod.
The standard power supply for Shanghai miniature electric hoist is single-phase AC, and a socket with a ground wire must be used.
. Warning: Ensure that all cables are kept at an appropriate distance from rotating or hot parts on the Shanghai mini electric hoist.
The Shanghai miniature electric hoist is in a non-lowering state, and the last three circles of red-painted steel wire rope on the Shanghai miniature electric hoist drum cannot be released. If you continue to press the lowering switch, the wire rope will be wound around the rope drum, causing the electric hoist to open and lower in reverse, so that the limit switch will lose its function.