Year1
- 规格：
- 长度
- ∅50：
- 1.5米。3米
- ∅60：
- 1.5米。3米
The electric rod unit is made of corrosion-resistant alloy material, and the high-energy backfill material is made of chemical materials with anti-corrosion properties and high-pressure impact resistance as auxiliary materials. Greatly extend its service life. Guaranteed for years of use.
The backfill material is made of physical and chemical substances with strong water absorption, strong adsorption force and strong ion exchange capacity as the main material. Complete the efficient and tight integration of the electric rod unit and the surrounding soil, and will reduce the resistivity of the surrounding soil, effectively enhancing the lightning conduction and release capability.
High-energy backfill can fully contact the ground rod and surrounding soil, greatly reducing contact resistance. And it has good fluidity and permeability, which increases the contact area with the soil, thus increasing the drainage area.
Since the electric rod unit is made of low magnetic permeability material, it has strong resistance to direct lightning induced pulse attacks and protects against the secondary effects of lightning.
Due to its excellent grounding effect and strong regulating function, it is mainly used in areas with high soil content and cities with highly dense buildings.
Due to its excellent grounding effect, it occupies less area, requires less construction work, and saves materials.
All materials used in the anti-corrosion ion grounding body are non-toxic and non-polluting, and are green and environmentally friendly products.
Production process br/> The ion electric rod tube is made of high-quality copper tube. The inner wall of the rod tube is treated with the latest ceramic coating technology, which has super strong acid and alkali anti-corrosion performance. The outer wall of the rod tube is sprayed with a layer of polymer anti-corrosion conductive material. It has excellent anti-corrosion ability and low resistivity. The upper and lower ends of the rod tube are designed with moisture absorption holes and ion release holes respectively.
The ion generating device inside the ion electric rod is filled inside the rod tube, which has strong ion release performance, and has the functions of water absorption and moisturizing, ionization conduction, and long-term sustained release.
The external special filling material of the ion electric rod is non-metallic conductive material, which is anti-corrosion and environmentally friendly. It is added with water absorption, moisturizing, coagulation, penetration and soil improvement ingredients. It interacts with the electrolytic ions released in the rod tube to continuously improve the conductive properties of the surrounding soil. , to achieve the effect of grounding resistance reduction.
Specifications and technical parameters
* Product life > years
* Resistance change rate of the ceramic coating anti-corrosion layer on the inner wall of the rod and tube △%%
* Impact withstand current density/
* Power frequency withstand current density/
* Acid resistance, alkali resistance, salt resistancebr/> Construction parametersbr/> When the grounding resistance requirements and the horizontal grounding rod grounding resistance are known, a vertical grounding rod grounding resistance is required Calculate the grounding resistance of the grounding network
The grounding resistance of the horizontal grounding body
The grounding resistance of the vertical grounding body
The shielding utilization coefficient between the horizontal grounding body and the vertical grounding body,
Ground resistance calculation formula of a single straight-axis anti-corrosion ion grounding body
Ground resistance of a single anti-corrosion ion grounding body
Soil resistivity (.)
Electric rod length
Grounding rod, etc. Effective diameter (normally, it can also be adjusted appropriately according to the diameter of the backfill hole)
Soil adjustment coefficient, % (the change range is % ~ %, but does not exceed % after one month. The higher the initial soil resistivity, the greater the reduction percentage. The stabilization time of high-density soil takes longer.)
Through the ion release effect of the internal and external filling materials of the electric rod, the contact environment between the electric rod and the surrounding soil is improved to achieve the purpose of reducing resistance. By laying a large amount of metal materials, a certain For resistance in the area, implement ordinary grounding methods to achieve low ground resistance
Grounding stability The external filling material has good anti-corrosion, water absorption, moisture retention, and is not affected by climate change. The ground resistance will continue to enter after one week after the construction is completed. Stable state, not affected by the dryness and moisture of the soil, and will not rise over time.
, Dry contact, dry and humid conditions, the ground resistance fluctuates greatly
In addition, due to corrosion, the ground resistance rises rapidly over time
The life cycle has an anti-corrosion effect, and the ion Automatic replenishment, so the effective life cycle is more than one year and the anti-corrosion is poor. Every to years, the soil needs to be renovated to reduce the soil resistivity
Professional engineering technology, obvious resistance reduction effect, simple construction, small amount of work, comprehensive Low cost, low technical level, large project volume, and no process guarantee
WhatsApp
